Precision Shelf Extrusion Metal Profile for Auto Part

Specifications

Extrusion Part
1.Nice design
2.Well treatment
3.Strictly quality control
4.Timely delievery

 

    Precision Shelf Extrusion Metal Profile for Auto Part    

 

 

     

 

Features of 5000 series:
1. Can be referred to as aluminum and magnesium alloys. Magnesium content between 3-5%.
2. Non-heat-treatable alloy
3. Low density, high tensile strength and elongation rate. Good corrosion resistance,

    weldability and cold workability.

Technical standard national standard (GB/T 3880-2006)

The application scope of 5083 aluminum plate
5083 aluminum plate is often used in materials for ships, vehicles, cars and aircraft plate weldments pressure vessel, which is to be strict fire prevention, cooling device, television tower, drilling equipment, transportation equipment, missile component and armor.

The chemical composition of 5083 aluminum plate
Al: Aluminum allowance Si: 0.4 or less Cu: 0.1 or less Mg: 4.0-4.9
Zin: 0.25 Mn: 0.40-1.0 Ti: 0.15 or less Cr: 0.05-0.25 Fe: 0.4
Individual: 0.05 Total: 0.15

The application scope of 5052 aluminum plate
5052 aluminum plate is mainly used in the request high plasticity and good weldability, working in a liquid or gas medium low load parts, such as tank, gas or oil duct, and other various liquid containers made of deep drawing parts: Small load wire used for rivet. Also commonly used in the transportation vehicles, ships, sheet metal parts, instrument, lamps stent and rivet, metal products, electrical enclosure, etc.