Pneumatic Actuator AT Series, rack and pinion actuator, air torque pneumatic actuator

Specifications

Anodic oxidation, polishing treatment inside and nickel plating process outside enables the actuator have better anti-corrosion.

Pneumatic Actuator AT Series

 Pressure Range: Max. working pressure 10bar
Double-acting:2.5bar~8bar
Single-acting:2.5bar~8bar
Adjustment Range: 90°±5°
Lubrication: All the moving parts are coated with lubricants, extending their service life
Life Time: One million time

Type: Single-acting, double-acting

 

I. Actuator Body

Boy material is aluminium alloy. Internal and external surface are treated with anodic oxidation and polishing. Outer surface is nickle plated so that the anti-corrosion fuction of actuator and minimum friction against pistons can be guaranteed. 

 

II. End Cover

End cover material is die-casting aluminium. End cover is treated with epoxy polyester so as to best guarantee the anti-corrosion performance.

 

III. Drive Shaft

The drive shaft material is medium carbon steel with fine processing and nickle plating so that the pistons have better quality in anti-corrosion, anti-friction, etc.

 

IV. Piston

Piston material is die-casting aluminium alloy. Maxmium torque can be output when the actuator is actuated with certain pressure.

 

V. Piston Seal

NBR-70 rubber sealing is applied to ensure the normal and reliable performance of actuator under normal temperature. FPM can be also applied according to clients' requirements.

 

VI. Travel Adjustment

Plus/Mimus 5 degree travel can be adjusted through the two bolts.

 

 

II. CE Certificate

 

 

 

 

 

 III. Test Equipment