Contact Platform Support
Help CenterChemical Polyurethane PU Adhesive for Air Filter
Related Products
-
Two Component PU Adhesive for Air FilterUS$ 4 - 5MOQ: 1 Ton -
Polyurethane PU Adhesive for Filter ManufactureUS$ 2.95 - 3.27MOQ: 1000 Kilograms
-
Automatic PU Adhesive for Filter (100:25) FactoryUS$ 3.2 - 3.4MOQ: 1000 Kilograms
-
100:25 PU Adhesive for Air Filter FactoryUS$ 3.27 - 3.4MOQ: 1000 Kilograms
-
PU+MDI Mixed Adhesive for Air FilterUS$ 3 - 4MOQ: 1 Ton
Specifications
1.The machine injected2.Best for the air filter
3.Two component adhesive
4.Attend the auto exhibition
5.Machine injection
double-component polyurethane adhesive
proportion ratio is 100:25
|
Two-component polyurethane adhesive for machine component proportion ratio is 100:25 | ||
|
Material-A |
Material-B |
Physical nature |
orange-red viscous liquid (color based on your request to configure) |
brown-yellow liquid |
viscosity |
800-1000MPa.S(25°C) |
25-50MPa.S(25°C) |
density |
1.02g/ml |
1.02g/ml |
package(as your request) |
Plastic bucket or Tin bucket |
Plastic bucket ,Tin bucket, Plastic pots |
storage |
1. Material-A and material-B can store up 3-6 months. |
|
2. To appropriate indoor storage above 15°C | ||
Usage:
1.The material must be full rocked after each to the plastic injection machine plastic injection so that the A material mixing evenly.
1.Everytime the plastic injection machine plastic injection A material must be full before the shaking in order to the material until
2.AB material proportioning ratio of A:B=100:25 or 4:1.28°C,you can start operation
3.Material temperature controlled 24°C-28°C appropriate then you can start operation.
4. Must be clean before using the mould release agent (Note:
The new plastic mould can be wiped free)
5 .If A and B is not reaction please measuring A and B ratio.
6. A and B must be sealed to .To avoid the air and water vapor reaction, as a result affecting the effect of colloidal
Attention:
1. The products are generally stored in a dry room, and pay attention to water, moisture and sun. Must cover the plug and cover, to avoid absorbing rubber moisture in the air, affect the results
2. Mould must be painted in front of the mould release agent,to be poured glue dry before.
3. A.B glue in ordinary temperature of 25 °C properly used, if the temperature is too high or too low will affect the use effect. You must use artificial methods of cooling or heating.
Hebei Anping county Sanlian filtering equipment .
Address: Hebei Province Anping County, Hengshui City, Hebei Filter City
Welcome to obtain samples of information to help you test the performance of adhesives, making the right to save money purchasing decisions.
Send Inquiry to This Supplier
You May Also Like
-
Silicone & ProductsNegotiableMOQ: 2400 Kilograms
-
Factory Price TPU Resin TPU Granules KG Thermoplastic Polyurethane Powder for Sports Shoe Sole/Cable/Phone Case TPU PelletsUS$ 2.22MOQ: 1 Kilogram
-
50ml Loctite Screw Glue 290 Penetrating Medium Strengthanti-loose Metal Thread Locking Agent 222 243 242NegotiableMOQ: 1 Bag
-
Low Temperature Hot Melt Adhesive for Baby Diaper and NapkinsUS$ 2.8 - 3.2MOQ: 1 Ton
-
2016 Zhengzhou Factory Natural Artificial Stone Mold for Making Artificial StoneUS$ 1 - 30MOQ: 1000 Pieces
-
Hot Seal de High Quality Silicon Rubber Bushing From China O RingsUS$ 0.1 - 10MOQ: 100 Pieces
-
Aluminum Foil Self-adhesive TapeNegotiableMOQ: 100 Rolls
-
Glue Stick, Hot Melt Glue Stick, Glue Gun StickUS$ 2.9 - 2.9MOQ: 100 Kilograms
-
Best Quality Cheapest Animal Shape Silicone Rubber Oven MittsNegotiableMOQ: 2000 Pieces
-
8 Pieces in a Pack Super GlueUS$ 0.33 - 0.33MOQ: 1800 Sets
