ALL CATEGORIES

Home > Chemicals > Silicone & Silicone Products > Polyurethane PU Adhesive for Filter Manufacture

Polyurethane PU Adhesive for Filter Manufacture

Name: Polyurethane PU Adhesive for Filter Manufacture
Brand: JASL
SKU: 108065745

US$ 2.95 - 3.27 MOQ: 1000 Kilograms

Key Specifications

CAS No.:

9009-54-5

Other Names:

two component adhesive

MF:

C3H8N20

Anping County Sanlian Filtering Equipment Co., Ltd.

Payment & Shipping

Payment Methods:

Port of Shipment:

tianjin port

Delivery Detail:

Delivery time depends on order quantity.

CAS No. 9009-54-5

Other Names two component adhesive

MF C3H8N20

EINECS No. 210-898-8

Place of Origin Hebei, China

Classification Double Components Adhesives

Main Raw Material Polyurethane

Usage Other, for filter

Brand Name JASL

Model Number 100:25

Specifications

1.environmental product
2.low cost and good sealing
3.attend the auto exhibition
4.ISO9001

Instructions:

1. Material-A should be stirred or shaked well when you injected it into the machine.

2. Material-A and material-B are mixed at the mixture ratio 100:100-36-37

3. The material’s work temperature should be controlled 24°C-28°C then you can start operation

4. Brushing the mould with release agent before using the mould (notice: the new plastic mould can be wiped free)

5. If the response is inadequate, please measure the ratio

6. Material-A and material-B must be sealed to store. Or they can react with air or water, affect using effects.

Features	Part-A	Part-B
Ingredients	Polyether polyols	MDI
Color	As your request	Brown-yellow
Viscosity (25°C)	800-1000MPa.s	25-50MPa.s
Density	1.02g/ml	1.27g/ml
Physical form	Viscous liquid (sticky liquid)
EXP	6 months
Application	Injection automobile air filter end cover
Package	Export standard seaworthy packing
Hardness	Shore A
notes	1. Keep in airproof, cool and dry place. Inner plunger and outer cover should be tightly covered. Or glue stock will absorb water in air and affect using effects.
	2. Material-A or material-B could be used normally in the temperature of 25°C, if the temperature is too high or too low will affect the results. Must use artificial means to cool down or heat up the temperature.
	3. Brushing the mould with release agent before pouring the adhesive into the mould, after the release agent dry then pour the adhesive.