High Quality Special PU Glue for Air Filter Using
high quality special PU glue for air filter using
Two component manual PU filter adhesive SLAP133
PU adhesive is flexible and it can be made filter end caps by casting, thus saving the metal end caps and rubber strips of air filters. And it is the best product for plate filters as well.
Physical properties:
Component A
Appearance: orange even liquid (other colors are also available upon request)
Density: 1.02g/ml
Viscosity: 800-1000Mpa.S (25°C)
Component B
Appearance: brown liquid
Density: 1.27g/ml
Viscosity: 25-50Mpa.S ((25°C)
high quality products; 24-hour online techinical support, in-site guide and instruction when necessary
Anping County Sanlian filtering equipment Co., Ltd is located in Anping county, which is famous for "International Wire Mesh Base". We manufacture filter making machine such as Filter paper pleating machine, PU machine, Filter cover gluing machine, Mesh slitting machine, and also we manufacture specialized filter adhesive including PU adhesive, PVC adhesive, AB glue etc, for Auto filters and industry air filter cartridges. Besideds, we supply Wire mesh, Plastic molds, Non woven filter media and varieties of other filter materials.
Founded in the early 1990s, we have been committed to making high quality products by continuously improving science and technology levels and cultivating talents. Our products are not only well sold in the domestic market, but also exported to international market, such as Southeast Asian, Middle East, Africa, South America and so on.
Our mission is to provide quality products to the automotive filter manufacturer, thus help them expand their market share. More importantly, these products will result in economic and environmental benefits. We sincerely hope to work together with you and jointly create a win-win business.
1. How to use the high quality special PU glue for air filter?
- 1. Stir evenly component A by manual drill before everyday using and shake evenly component B;
- 2. Add 3-6g water in component A per kg
- 3. Clean the mold by mold release agent.
- 4. Mix component A and B in a ratio of 100:33, and add 40% talcum power. Stir the mixed glue by 2800-roll-per-minute-rotor drill. The time depends on the quantity. Generally 7-10seconds for per 100g glue.
- 5. Pour the evenly stirred glue in the mold and press the paper filter on it.
- 6. Releasing the mold after 10 minutes.
- 1. 6-9 months for Component A and B
- 2. Better to store in a room above 15°C
- 1. The glue should be stored in a dry room to avoid water, humidity and direct sunshine. Both the inner and outer caps should be tightly closed to avoid humidity in the air and affect the effectiveness.
- 2. The normal working temperature of AB glue is 25°C. If the environment temperature is too high or too low, the effect may be affected. Better adjust the temperature manually.
- 3. Clean the mold and do not pour the glue until the mold is clean and drying up.
Website:
Anping County Sanlian Filtering Equipment Co.,Ltd.
Tel: 86-318-7850508 Fax: 86-3-752184169
Send Inquiry to This Supplier
You May Also Like
-
Factory Sale Polyether-based TPU Material TPU Granule for Ski BootsUS$ 2.22MOQ: 1 Kilogram
-
50ml Loctite Screw Glue 290 Penetrating Medium Strengthanti-loose Metal Thread Locking Agent 222 243 242NegotiableMOQ: 1 Bag
-
Low Temperature Hot Melt Adhesive for Baby Diaper and NapkinsUS$ 2.8 - 3.2MOQ: 1 Ton
-
2016 Zhengzhou Factory Natural Artificial Stone Mold for Making Artificial StoneUS$ 1 - 30MOQ: 1000 Pieces
-
Hot Seal de High Quality Silicon Rubber Bushing From China O RingsUS$ 0.1 - 10MOQ: 100 Pieces
-
Aluminum Foil Self-adhesive TapeNegotiableMOQ: 100 Rolls
-
Glue Stick, Hot Melt Glue Stick, Glue Gun StickUS$ 2.9 - 2.9MOQ: 100 Kilograms
-
Best Quality Cheapest Animal Shape Silicone Rubber Oven MittsNegotiableMOQ: 2000 Pieces
-
8 Pieces in a Pack Super GlueUS$ 0.33 - 0.33MOQ: 1800 Sets
-
Mmodified Corn StarchUS$ 675 - 705MOQ: 10 Tons





