Best Quality Specialized PU Foam for Air Filter Using
best quality specialized PU foam for air filter using
SLAP140
Manual PU adhesive, good quality PU system for automotive air filters, to injection filter end cap, can also use the semi-automatic PU casting machine, low cost for general enterprise.
Technical parameters:
Item |
Component A |
Component B |
Appearance |
cream viscous liquid(adjustable) |
light brown liquid |
Density 20℃ (g/ml) |
1.02±0.02 |
1.20±0.03 |
Viscosity 25℃ (mPa.S) |
800±100 |
50±20 |
Storage |
6 months at temperature (-5℃ to 30℃) Stored indoors in the tightly sealed drums |
|
Mixing ratio by weight |
100 |
40 |
Cream time |
15-20s |
|
Demold time |
10±2min |
|
Shore A hardness |
30±5(adjustable) |
|
Color |
Orange(adjustable) |
|
Tensile strength |
≥0.8 MPa |
|
Elongation at break |
≥90% |
|
high quality products; 24-hour online techinical support, in-site guide and instruction when necessary
Anping County Sanlian filtering equipment Co., Ltd is located in Anping county, which is famous for "International Wire Mesh Base". We manufacture filter making machine such as Filter paper pleating machine, PU machine, Filter cover gluing machine, Mesh slitting machine, and also we manufacture specialized filter adhesive including PU adhesive, PVC adhesive, AB glue etc, for Auto filters and industry air filter cartridges. Besideds, we supply Wire mesh, Plastic molds, Non woven filter media and varieties of other filter materials.
Founded in the early 1990s, we have been committed to making high quality products by continuously improving science and technology levels and cultivating talents. Our products are not only well sold in the domestic market, but also exported to international market, such as Southeast Asian, Middle East, Africa, South America and so on.
Our mission is to provide quality products to the automotive filter manufacturer, thus help them expand their market share. More importantly, these products will result in economic and environmental benefits. We sincerely hope to work together with you and jointly create a win-win business.
1.How to use the products to its maxium effect?
Instructions:
1. Material-A should stir evenly with hand electric drill, material-B shake, before use.
2. Open the electrocaloric plate temperature to 40-50 degrees, in winter material-A and material-B with a small container to preheat.
3. Wipe the mould with release agent
4. Each 1kg A add 3-6g water, also according to the local environment, such as the humidity in the air, workshop environment.
5. Material-A, material-B and talcum powder(heavy calcium powder)are mixed at the mixture ratio of 100:40:50, add powder to A, then mixing B, with 2800 rev/min motor to mix, mixing time per 200g of adhesive is approximately 8-12 seconds .
6. Pour the Mixed liquid into mould, then put the paper element and give a little pressure on it. 8-15 minutes later you can bring the mould down.
Website:
Anping County Sanlian Filtering Equipment Co.,Ltd.
Tel: 86-318-7850508 Fax: 86-3-752184169
Send Inquiry to This Supplier
You May Also Like
-
Factory Sale Polyether-based TPU Material TPU Granule for Ski BootsUS$ 2.22MOQ: 1 Kilogram
-
50ml Loctite Screw Glue 290 Penetrating Medium Strengthanti-loose Metal Thread Locking Agent 222 243 242NegotiableMOQ: 1 Bag
-
Low Temperature Hot Melt Adhesive for Baby Diaper and NapkinsUS$ 2.8 - 3.2MOQ: 1 Ton
-
2016 Zhengzhou Factory Natural Artificial Stone Mold for Making Artificial StoneUS$ 1 - 30MOQ: 1000 Pieces
-
Hot Seal de High Quality Silicon Rubber Bushing From China O RingsUS$ 0.1 - 10MOQ: 100 Pieces
-
Aluminum Foil Self-adhesive TapeNegotiableMOQ: 100 Rolls
-
Glue Stick, Hot Melt Glue Stick, Glue Gun StickUS$ 2.9 - 2.9MOQ: 100 Kilograms
-
Best Quality Cheapest Animal Shape Silicone Rubber Oven MittsNegotiableMOQ: 2000 Pieces
-
8 Pieces in a Pack Super GlueUS$ 0.33 - 0.33MOQ: 1800 Sets
-
Mmodified Corn StarchUS$ 675 - 705MOQ: 10 Tons


