zinc stick-on adhesive wheel weights

Specifications

ISO9001 Certificate
1. Die-casting
2. Lead free
3. Pure zinc
4. size 5gx4+10gx4, 5gx12

 

Item No.	specifications	tape	finish	quantity in box	quantity in carton
XZ-02	5gx12, 5gx4+10gx4,	blue tape, 3M tape, Norton tape, white tape	plastic coated	100strips	4boxes

We are approval with ISO9001:2000 certification with strictly quality system.

OEM welcome

 

We are professional wheel weight manufacturer, suppling various wheel balance weight:

*Fe clip-on wheel weight

*Fe stick-on (adhesive) wheel weight

*ZN clip-on wheel weight

*ZN stick-on (adhesive) wheel weight

*PB clip-on wheel weight

*PB stick-on (adhesive) wheel weight

*Tyre repair material and tools

*Wheel weight die-casting machine

1.Clean the rims with an appropriate cleanser (e.g. 70% isopropanol) to avoid grease and silicone residues on the rim.Ensure that the temperature of weight, rim and ambient is not lower than 16°C.

2. After clean the rim, it is necessary to verify that the curvature of the rim is suitable to the weight.Place the weight (still withthe protetive film) slightly on the same rim, in order to obtain the pre-adaption of the weight.The radius of the weight body and the rim should go at least parallel to each other.

3. Remove the protetive film of the weight,and put the weight on the correct place. The weight should be applied with a pressure (at least100 kPa) pressing from the center to the two ends.

 

4. Press from the center towards the two ends after placing the weights. The adherence force reaches 80-90% after about 24 hours, In 72 hours, the adherence force reaches 100%.