ONU 4*10/100M Ethernet Ports;1*GEPON Port;Plastic casing;external power supply;

Specifications

Upstream PON interface: 1 EPON interface, SC single-mode/single-fibre symmetric 1.25Gbps
Wavelength Tx 1310nm, Rx 1490nm

4*100M Port ONU

OFS-EP8104H(4FE EPON SFU) is an EPON broadband terminal device designed for fulfilling FTTH/FTTO request of telecom/Cable operators, and internet access of SOHO people. This product is basing on the stable and mature Gigabit EPON technology, which has high performance/price ratio, and the technology of Layer 2 Ethernet switch. It is highly reliable and easy to maintain, with guaranteed QoS. And it is fully compliant to technical regulations such as IEEE802.3ah and technical requirement of EPON Equipment (V2.1) from China Telecom.

       

 

Product features:

Plug and play, auto-discovery, auto-configure, auto-update etc;

Support OAM protocol to configure and manage the device remotely;

Ethernet ports support anti-surge protection, adapt to the environment strongly;

Support VLAN, IEEE802.1QinQ, port rate limitation etc;

PON port supports optical power and transceiver temperature detection features.

 

 

Parameters

 

Physical features:

 

Choose a good airflow, clean and dry environment for the device. In order to avoid accident fault, please conform to the following conditions:

Work temperature: -5°C ~ +45°C;

Storage temperature: -30°C ~ 60°C;

Work humidity: 10% ~ 90%, non-condensed;

Power supply: 12Vdc/1.5A through an external power adapter.

 

 

 

 

Indicators description

 

Indicators	Mark	Status	Description
Power indicator	POWER	On	Device powers on
		Off	Device powers off
LAN1 status indicator	LAN1	On	LAN1 connected to PC normally
		Off	LAN1 is idle or connected to PC abnormally
		Blinking	LAN1 is transmitting and/or receiving data
LAN2 status indicator	LAN2	On	LAN2 connected to PC normally
		Off	LAN2 is idle or connected to PC abnormally
		Blinking	LAN2 is transmitting and/or receiving data
LAN3 status indicator	LAN3	On	LAN3 connected to PC normally
		Off	LAN3 is idle or connected to PC abnormally
		Blinking	LAN3 is transmitting and/or receiving data
LAN4 status indicator	LAN4	On	LAN4 connected to PC normally
		Off	LAN4 is idle or connected to PC abnormally
		Blinking	LAN4 is transmitting and/or receiving data
Register status indicator	PON	On	Device registered to EPON OLT
		Off	Device unregistered to EPON OLT
		Blinking	Error occurred during register
Fiber loss indicator	LOS	Blinking	Device does not detect fiber signal
		Off	Device detects fiber signal

 

 

Back view description:

Interface	Mark	Type	Description
Uplink Optical port	PON	SC/PC	Connected to ODN by fiber
Downlink 10/100M Ethernet ports	LAN4	RJ45	Connected to PC, Switch or Router, Support auto-adaptive and AUTO-MDIX
	LAN3
	LAN2
	LAN1
DC power supply interface	POWER	-	Connected to 12Vdc power supply
Power Switch	SWITCH	button	Power on/off the device

Table 3 Device interface description

Chapter2 Device installation

Read this chapter carefully before installation.

Check packaging

Firstly, check whether the packaging is complete. The followings will be packaged:

 

Table 4 Packaging goods