8.7/15KV XLPE Insulation STA armoured Power Cable

Specifications

1.Standard:IEC60245
2.Certificate: CQC ,3C
3.Strict QC
4.99.95% purity rate copper conductor

                                               8.7/15KV XLPE Insulation STA  armoured Power Cable

Application 

 

It is used in power plant or power station ,it can be direct buried or in ground, it can bear external mechanical forces.

.

 

Construction

 

 

 

 

1.Conductor                                  2.Insulation                                    3.Inner sheath

 

4.Steel tape armoured                   5.Steel wire armoured                    6.Sheath

 

 

Technical  data

 

 

Rated voltage:8.7/15KV

 

Highest working temperatue of conductor: 90°C

 

Laying temperature:above 0°C

 

Minimum bending radius:12D

 

 

Product  description

 

Type		Description	Application
Cu	Al
YJV	YJLV	Copper-core(aluminum core)XLPE insulation and PVC sheath power cable	For laying indoor,in tunnels and in ducts,unable to bear external mechanical forces
YJY	YJLY	Copper-core(aluminum core)XLPE insulation and PE sheath power cable
YJV22	YJLV22	Copper-core(aluminum core)XLPE insulation steel tape armoured PVC sheath power cable	For laying indoor,in tunnels and in ducts,can able to bear external mechanical forces
YJV23	YJLV23	Copper-core(aluminum core)XLPE insulation steel tape armoured PE sheath power cable
YJV32	YJLV32	Copper-core(aluminum core)XLPE insulation steel wire armoured PVC sheath power cable	For laying in water or ground along route with large difference of level,can able to bear external mechanical forces
YJV33	YJLV33	Copper-core(aluminum core)XLPE insulation steel wire armoured PE sheath power cable
YJV42	YJLV42	Copper-core(aluminum core)XLPE insulation thick wire armoured PVC sheath power cable
YJV43	YJLV43	Copper-core(aluminum core)XLPE insulation thick wire armoured PE sheath power cable
Notes:1.Ratproof,termite-proof,moisture-proof and other special requiremments cables are available.
2.The single core armoured cable are used for DC system only.As for AC system,non-megnetical materials shoule be used,its corresponding code is 62,63,72,73;
3.It is not recommended AL-core fire retardent cable.When there is a fire,flame temperatures may reach 700°C above due to the meilting point of aluminium is only 660°C,the conductor may be fused;
4.Flame retaradant/fire resistant power cable are available:Representation method of flame retardant grade is the "Z" followed by"A","B","C",such as the "ZA","ZB","ZC".When "ZR" expressed,generally considered to be "C" class of flame retardant.Flame retardant level representation is "ZN" middle "A","B","C",such as the "ZA","ZB","ZC".While using "NH" expressed,it generally considered to be "ZCN".For example;

 

Product picture

 

 

 

 

 

About   us