Outdoor P25 LED display screen with CE and Rohs certification

Specifications

1)competitive price
2)unique design structure
3)rich engineering experience
4)CE and RoHS certification

p25 outdoor led display dvantages:

 

1. High brightness and be adjustable. Built-in functional card support brightness automatically adjustment.
 
2. A turn-key solution including professional sports software and hardware.
 
3. Rich advertising  LED display engineering experience both in domestic and oversea market.
 
4. Unbeatable product stability through strict Quality Control System.

 

 

p25 led display specification:

 
Pixel pitch (mm) 25
Cabinet size (mm) 1000*1000
Brightness (nit) 5000
Module size (mm) 200*200
Pixel configuration (R,G,B) 2,1,1
Pixel matrix per module (dot) 8*8
Pixel (dot/s.q.m) 1600
Viewing distance (Min) (m) 25
Gray scale (level) 4096
Refresh frequency (Hz) 1000
Input power (max/avg) 512/205
Viewing angle-H (deg.) 120 (+60/-60)
Viewing angle-V (deg.) 60 (+30/-30)
Blind spot rate <1/10000
Color temperature (K) 6500
Ingress protection (front/rear) IP65/IP43
Input voltage (AC) 110 ~ 240
Input power frequency (Hz) 50 or 60
Signal input format (with video processor) AV, S-Video, VGA, DVI, YPbPr,
HDMI, SDI
Operating system Windows (2000/XP/Vista)
Control distance CAT5 cable:<100 m; Single fiber:<10 km

 

Connection:

 

 

 

After-sale service:

 

1. Lifetime free maintenance and upgrade.

 

2. Complaint respond period not exceed 24 hours; maintenance guidance and problem solution supplied in 48 hours.

 

3. Customer satisfaction tracking report.

 

4. Free technician training.

 

5. Full set of documents free of charge, which including installation guidance, software operation manual, easy maintenance

manual and control system software CD and so on.

 

6. Special service for big project, such as stadium, exhibitions, squares and so on.

 

LED display installation steps:

1.   Assemble the cabinets on the structure.

2.   Connect the UTP cables between cabinets.

3.   Connect the AC cables between cabinets.

4.   Install Sending Card.

5.   Connect the DVI cable between Sending Card and Graphic   Card.

6.   Connect the COM cable between Sending card and   computer.

7.   Connect the UTP cables between Sending Card and Receiving Card.

8.   Turn on control computer.

9.    Install LED studio software (see attached CD and serial number is 888888)

10.   Turn on LED display.

11.   Set the display mode in “clone mode” in the window of Graphic Card properties.

12.   Use the LED studio to control the display.

 

All product specifications are for reference only and subject to change without prior notice; Please contact sales for details.

 

At the same time, we can design according to customer requirements and production.