Motorcycle Fully Waterproof Power Charger 5V 2A

Specifications

Motorcycle Fully Waterproof Power Charger 5V 2A
motorcycle power supply
12V~24V Input

Motorcycle Fully Waterproof Power Charger 5V 2A

 

 

Input voltage:  12V~24V

Input currently: 1.5A MAX

Output  DC: 5V 2A

 

Charge the mobile phone of your choice whilst riding your motorcycle, motorbike or moped safely and with ease.

This phone charger can connect directly to the motorbike’s battery terminals and be hardwired into your system.

With waterproof cabling and switch box, you can safely store the hard wiring in the area under the seat and the switch box somewhere accessible so that you can control the charging of your phone

We stock the following alternative power connectors:
iPhone - fits the iPhone 4S, 3G, 3Gs & 4
Straight Mini USB - ideal for SatNav GPS systems
Micro USB - ideal for newer models of HTC, Blackberry, Motorola, Sony Ericsson, LG SmartPhones (Check your mobile phones handbook for charger type)

This system uses a 2 amp(3amp for 5V 2A) fuse and a waterproof voltage regulator, featuring an On / Off switch so when left for a long time you can stop the drain on your bike’s battery. The phone charger features a standard USB connection so it is truly universal and useful to all mobile phone users.

 

Features and specifications:

 

1	Input Voltage: DC 12V/24v	9	3A blade fuse
2	Output Voltage: DC 5V	10	CE Approved
3	Max Charging Current: 2A	11	12 Months Warranty
4	Reverse Voltage Protection	12	Surge Protector
5	Short-Circuit Protection	13	Overload Protection
6	Weather cap	14	Cable ties
7	On / Off Switch	15	Water Resistant
8	USB power connector	16	Waterproof gland for USB cable

 

 

 

Dimensions:

 

Battery terminals - Switch box	80cm
Switch box - USB connection	1m
On/Off Switch Box	59*39*24mm
Unit weight	115G
Inner package	PE bag
N.W/CTN	12KG
G.W/CTN	13KG
QTY/CTN	100PCS
Mea. CTN	52*26.5*37.5cm

 

 

 

 

 

 

 

 

    

 

 

.

 

 

 

   

 

Overload, Overvoltage, Short Circuit Protection CE approved

 

 

Introduction

 

1.Remove battery terminals,connect red lead to positive and black lead to negative terminal.

 

2.Run the cable along frame tube,keeping away from any hot areas.Ensure easy access to

 

the on/off switch on black control box.Secure any loose wires with the cable ties provided.S

 

ecure black control box to the bike using cable ties in an area away from direct heat.

 

 

3.Slide the yellow gland around your phone’s data/charging connection cable.

 

4.Remove waterproof cover from the charger.Plug in USB charge lead with the yellow gland to

 

form a waterproof seal.

 

 

5.Switch on the charger with black domed switch.

 

 

6.Whilst leaving the bike for long periods,switch off to avoid draining bike battery.