Thermal transfer glue granules-HR222

 HR-222 thermal transfer glue granules,It is ordinary washing rubber particles, excellent adhesion, abrasion performance, the product complies with European EN-71 and American ASTM, phthalates, RoHS and other environmental standards. Suitable for all kinds of shoes, mesh, woven fabrics, cotton, nylon cloth, chemical fiber, heat transfer with luggage.

Each pack 25KG, a package can melt into particles about 55KG transfer glue, reduce costs, ease of use, screen printing 80-120 mesh gauze, high flexibility, feel good, resin powder can be added to make it faster drying, Join hot melt powder printing 15-30%, and then over bake 120-160 degrees, if it is sprinkled on top meal can hand glue is dry before transfer. Mainly for Opp film and PET film.

Description of product:

 Physical Appearance light yellow transparent particles

               1. Viscosity 5500 +500 cps (25 °C, LVT2/60)

               2. Solid content 100%

               3. Tensile Strength 26002

               4. elongation of 600%

               5. softening point 110 °C -130 °C

               6. solvent such as toluene, xylene, cyclohexanone (depending on the desired viscosity and the drying speed selection)

               7.dry rubbing fastness 5

               8. wash fastness 60 °C washing

Use: first particles with a solvent ratio of 1:1 (to increase or decrease demand, the concentration of self-control of glue), calculate the required amount of solvent, and then the solvent was added to the heat transfer in the hot melt adhesive particles, mixed, placed 24 hours until fully dissolved particles can be used. For speeding up the rate of dissolution, sustainable slowly adding a small amount of heat transfer hot melt granules and stir in a solvent, usually half an hour to finish all dissolved.

Store in a cool dry place, shelf life: 2 years.