Full Body Carbon Fiber Skin Sticker for iPhone4

Specifications

high glossy pearl glitter film
-with air drain
-Removebale adhensive
-Size:1.52x30m

Top quaity 180g 3D carbon fiber sticker with ai free bubbles

 

Model	TXD
Product	3D carbon fiber
Thickness	0.2mm
Heat resistance	-50°C to +200°C
Stretch rate	33+ pascal
Mask thickness before embossing	11.5c
Glue material	Imported removable glue
Glue thickness	0.02mm
Glue weight	30g/m2±2gm2
Gram weight of release paper	180gsm embossing paper
Thickness of release paper	0.15- 0.16mm
Stand up against	water, dirt, grease, salt, weak acids oil
Durability period	Indoor 7-8 years; outdoor: 5-6 years
Compatibility	Die cutting,car decoration,architectural decoration
Colors available	black,white,red,orange,apple green,blue,yellow

 

 Product Description:
1. Has a look & feel similar or better to carbon fiber bonnet and hard-top
2. Can be applied on interior and exterior surfaces of a car (hoods, trunks, side view mirrors etc.
3. Can be applied easily on all the common car paints
4. Cost-effective and can be cleaned with detergent and water.
5. Without residual glue on the car after remove
6. Service life for outdoor 3-5 years, indoor 12 years
7. Adhesive backing with air release technology for a bubble free installation

Installation Tips:
1. Cleaning the surface with rubbing alcohol prior to installing the vinyl will help with adhesion and clean any contaminants that may cause imperfections.
2. Using a heat gun can aid in the installation by making the vinyl more pliable and also help remove wrinkles.
3. Using a soft rubber squeegee will help smooth out bubbles and wrinkles

 

Application:
Carbon fiber modification on engine hood, empennage, surrounding surface, car handle, rotary plate, etc. It's the desire of car fans.