New hot Ink Refill kit for HP 685 emty ink cartridge with ink and syringe

Products details and refilling steps:                           

1.Put the empty cartridge into the gloove of the pedestal.

2.Exact ink from the ink tank by the syringe. If there is more ink leave in the syringe after refill, you can inject them back to the ink tank.

3.Plug the syringe to the refilling nipple and fill the ink .After refilling, take away the syringe and wait for a minute and them take out the cartridge for use.

Note:Please push the syringe to the end whem you do extracting and refilling.

Solution if ink doesn't come out after refill                             

1.Please do the printer nozzle cleaning program for 1 or 3 times.

2.Please redo the printing after a break of 20 minutes.

When need to do the refilling and how to do the chip reset  

As this product use auto reset chip, so the ink volume showed on the computer dialogue does not reflect the actual ink volume in the cartridge. Please follow up the below instruction to refill and reset the chip:

1.When need to refilling?

Although printer dialogue doesn't show ink finished, you still need to refill the cartridge immediately when you find there is white lines or missing color during printing.

2.How to reset chip?

When computer shows color missing, that means the chip needs to be reset. Please take out that color missing cartridge and install it again to the printer.

Instruction                                                                                      

If the ink is not easy to extract out, please use something hard to press the extracting nipple to release the minus pressure inside the ink tank.