OSG high efficient tap from Japan tool manufacturer OSG

Specifications

- OSG TAP
- Compatible with a wide range of processing equipment

OSG high efficient tap from Japan tool manufacturer OSG

• Best chip discharge performance
• High-grade internal threading
• Compatible with a wide range of processing equipment

 

The A-TAP series has the best chip discharge performance, high-grade internal threading,

and can be used with a variety of working materials.

Up until now, the optimum tool for a job differed depending

on the performance of individual processing equipment,

but these taps are compatible with a wide range of equipment from manually operated boor-bank

drilling machines to the latest machining centers.

Using a machining center will enable you to get even more out of these taps.

  

EDP NO.	Thread Size	TAP Limit	L	l	ln	Ds	Flutes	Type
8325234	M1.4X0.3	OH1	34	6		3	2	1
8325239	M1.6X0.35	OH1.5	36	7		3	2	1
8325244	M1.7X0.35	OH1.5	36	8		3	2	1
8325249	M2X0.4	OH1.5	40	3.2	10	3	2	1
8325630	M2X0.4	OH2.5	40	3.2	10	3	2	1
8325631	M2X0.4	OH3.5	40	3.2	10	3	2	1
8325250	M2X0.25	OH1	40	3.2	10	3	2	1
8325632	M2X0.25	OH2.5	40	3.2	10	3	2	1
8325252	M2.2X0.45	OH2	42	3.6	11	3	2	1
8325634	M2.2X0.45	OH3	42	3.6	11	3	2	1
8325254	M2.2X0.25	OH1	42	3.6	11	3	2	1
8325636	M2.2X0.25	OH2	42	3.6	11	3	2	1
8325254	M2.3X0.4	OH1.5	42	3.6	12	3	2	1
8325638	M2.3X0.4	OH2.5	42	3.6	12	3	2	1
8325259	M2.5X0.45	OH2	44	3.6	13	3	2	1
8325640	M2.5X0.45	OH3	44	3.6	13	3	2	1
8325641	M2.5X0.45	OH4	44	3.6	13	3	2	1
8325262	M2.5X0.35	OH1.5	44	3.6	13	3	2	1
8325642	M2.5X0.35	OH2.5	44	3.6	13	3	2	1
8325264	M2.6X0.45	OH2	44	3.6	13	3	2	1
8325644	M2.6X0.45	OH3	44	3.6	13	3	2	1
8325269	M3X0.5	OH2	46	4	19	4	3	1
8325650	M3X0.5	OH3	46	4	19	4	3	1
8325651	M3X0.5	OH4	46	4	19	4	3	1

Please refer to the catalog on our website for other sizes.
 

The high-speed steel tap XPF series enables 35HRC machining with high lubricity

and low cutting resistance, even for high hardness materials.

The taps come in a range of sizes from small M1 (small diameter) to M45.

They also boast excellent durability even with chlorine-free water-soluble cutting oil.
 

These taps demonstrate excellent performance with high hardness steel above 35HRC.

Using high-grade powdered high-speed steel and superfine cemented carbide (XPM),

which combines high toughness and wear resistance,

the taps are given a highly wear resistant V coating to maximize the welding base

materials special characteristics,

and as a result, they possess excellent chipping resistance and high rigidity.

With these taps, the machining of previously problematic,

high hardness material is possible.
 

The special thread specifications allow the manufacture of high quality threads

with fewer burrs resulting from manufacturing.

Thanks to the use of powdered high speed steel (CPM) which combines high wear resistance

and toughness, stable tapping performance can be achieved.

The surface has a CrN coating, which has a low coefficient of friction,

excels in wear resistance, and has excellent anti-fusing properties.

This ensures consistent durability. It features a rigid neck portion that resists breakage.

Ideal for the machining of HDD and other stainless steels

in the wake of advances in miniaturization.
 

The WX-PNC is a single tap that allows the machining of right and left-hand threads

and external and internal threads, even if the work piece has a differing external diameter,

providing that the pitch is equal.
 

 
The VP Nu-Roll Tap series with extra long tool life is applicable to various work materials :

carbon steels, alloy steels, general structural steels, stainless steels, aluminum, and cast metal.

It performs especially well with stainless steels.