Contact Platform Support
Help Center
Home > Electrical & Electronics > Integrated Circuit > General-purpose Integrated Circuit > Excellent ATMEL AT91SAM9M10 Development Board &core Board
Excellent ATMEL AT91SAM9M10 Development Board &core Board
Negotiable
MOQ: 1 Piece (Price negotiable depending on order volume and customization)
Key Specifications
Get Latest Price
Model Number:
QY-9M10EK
Type:
Other, Atmel
Brand Name:
QY
Payment & Shipping
Payment Methods:
Port of Shipment:
Shanghai/Ningbo
Delivery Detail:
Delivery time depends on order quantity.
Related Products
-
ATMEL AT91SAM9263 CPU Development Board & ARM Core BoardNegotiableMOQ: 1 Piece -
400M High-speed ARM926EJ-S Core Development BoardNegotiableMOQ: 1 Piece
-
64MB SDRAM EP9315 Development BoardNegotiableMOQ: 1 Piece
-
TI AM335X 256MB SDRAM Development Board & Core BoardNegotiableMOQ: 1 Piece
-
ARM Cortex-A8 Core 720MHz ARM Development BoardNegotiableMOQ: 1 Piece
Model Number
QY-9M10EK
Type
Other, Atmel
Brand Name
QY
Place of Origin
Zhejiang, China
Specifications
ATMEL AT91SAM9M10 development board1.128MB DDR2 RAM
2.support 10M/100M Ethernet
3.512K DataFlash 128M*8bits NandFlash
ATMEL AT91SAM9M10 Development Board Specifications
Core Module is designed by 6-floor PCB; the volume is only card size(74*53mm); together with CPU, 128M DDR2 RAM,128M Nand Flash, 512K DataFLash, 10/100Mbps; using 5V dc power supply, low power consumption and high performance power management function, to achieve the necessary CPU core voltage conversion; Industry standard design, through the high temperature resistant B to B (2*100) connector leads to a variety of commonly used interface resources, in order to offer fast and the secondary development of use for those who do not intend to design the CPU plate themselves, and it’s suitable for the batch used by the user.
Development Board is a general standard reference design board for QY-9M10P, with commonly used interfaces, such as TFT-LCD(1280*860), touch screen, VGA, camera, 8*8 matrix keypad, external bus interface, SPI, JTAG, 1 high-speed USB2.0 Device, 1 high-speed USB2.0 Host, 2 SD card storage interfaces, 1 debug serial port , 4 RS232 serial ports and audio input, output, MIC interface, with professional reset chip, reset switch; Support +6V~+23V wide range voltage power supply; can provide a complete design material for user to develop or customize.
Chip introduction
AT91SAM9M10 chip, the combination of the functional interface and high speed data connection, including LCD controller, resistive touch screen, the camera interface, audio, 10/100 M Ethernet, high-speed USB and SDIO, etc. As the processor running at 400 MHZ and multiple rates more than 100 MBPS peripherals, it use high performance and bandwidth network or local storage media to provide a good user experience.
ATMEL AT91SAM9M10 Development Board Core Module Specifications
CPU Processor
• ATMEL AT91SAM9M10,ARM926EJ-S Core
• 400MHz
DDR RAM Memory
• 128MB DDR2 RAM,133MH:,32bit data bus
FLASH Storage
• On-board 512K DataFlash (DB45041D)
• On-board 128M*8bits NandFlash (K9F1G08U0B) could change a large capacity or industrial chip according to customer's requirement.
Interfaces
• 2*100 pin 0.xmm spacing B to B (the connectors are 350°C high temperature-tested and seismic-tested)
Other Onboard Resources
• DM9161 net chip, support 10M/100M Ethernet with MII mode, more compatible than RMII;
• 1.8V, 3.3V, 5.0V voltage input
PCB Specification & Size
• Using six floors of PCB high precision process, and has the best electrical properties and anti-jamming performance
• 74 x 53 x 1.5mm
Working Parameters
• Working temperature: -20°C~ 70°C (batch user could customize -40°C~ 85°C)
• Humidity Range: 5%~ 95%, Non-Condensing
Low Power Consumption
• 5v Dc power supply, low power consumption, <1W
Support OS
• Linux2.6.30 + QT2.3 / QT4
• WindowsCE 6.0
ARM Development Board Software & Technical Support
| No. | Item | Function |
|---|---|---|
| J3 | Earphone output interface | Audio output |
| J4 | Line input interface | Audio input |
| J5 | MIC input interface | MIC input |
| J6 | TFT-LCD, Touch screen | Expand LCD interface, with 4-wire touch screen interface |
| J8 | VGA input | VGA video output, and display connection |
| J9 | Debug serial port | Download, communication |
| J10 | COM 1 | 232485 reuse |
| J11 | COM 2 | 232485 reuse |
| J12 | COM 3 | RS232 |
| J13 | COM 4 | RS232 |
| J14 | US 2.0 Device | High-speed USB(480MHz), used to download program |
| J15 | USB 2.0 Host | USB Host |
| J16 | SD card interface 1 | SD card storage |
| J17 | SD card interface 2 | SD card storage |
| J18 | Ethernet interface | 10/100M self-adaptive network |
| J19 | EBI bus interface | CPU internal bus |
| J20 | Camera interface | COMS interface, used as video collection and GPIO |
| J21 | Matrix keypad | 8 x 8 keypad interface, can used as GPIO |
| J22 | SPI interface | SPI bus interface |
| J23 | Standard JTAG interface | Simulation, debugging |
| J24 | Power interface | +12V power supply, support +6 ~+253V wide range voltage |
| K1 | System reset | System reset |
| K2 | Wake-up button | Sleep state activation |
| S1 | Power switch | Power supply control |
Linux Software Features
| Cross-compiler | arm-2007q1-10-arm-none-linux-gnueabi-i686-pc-linux-gnu.tar.bz2 | arm-linux-gcc 4.2 |
| U-boot | Version: U-boot 1.3.4 | Provided with bootstrap, U-boot source code |
| Support writing into DataFlash and NandFlash start | ||
| Support SAM-BA software with usb writing and TFTP network update | ||
| Linux Kernel | Version: 2.6.30 | |
| RTC driver, save and restore system time after power off | Provided with test program and source code | |
| SPI driver | Provided with test program and source code | |
| EBI driver | Provided with test program and source code | |
| I2C driver | Provided with test program and source code | |
| Audio driver | Provided with test program and source code | |
| LCD driver, support 320*240, 640*480, 800*480, 800*600, 1024*768 resolution; | Provided special LCD with debug service | |
| Touch screen driver, supporting 4-wire resistive screen | Provided with test program and source code | |
| Serial driver | Provided with test program and source code | |
| PWM driver | Provided with test program and source code | |
| Buzzer driver | Provided with test program and source code | |
| GPIO driver | Provided with test program and source code | |
| 8*8 matrix keypad driver | Provided with test program and source code | |
| USB driver, support mouse, keypad, U disk, WiFi, bluetooth, printer, camera, barcode scanning, etc. | Support various USB external devices, provided with debug service | |
| SD card driver | Support large capacity storage SD card | |
| File System | Jffs2 file system | Provided source code |
| QT Routine | QT development environment | QT routine |
| PC Development Environment | Provided with ubuntu 10.10 Linux OS, VMware 7.1.4 virtual machine and supporting development environment build manual | Convenient for user to next develop |
WindowsCE 6.0 Software Features
| Bootloader | Support writing into DataFlash and NandFlash start | Optional |
| Support user-defined boot logo | 1024*768 resolution, 24 bmp image | |
| BSP Source Code | ||
| BSP Open Source | RTC driver, save and restore system time after power off | Provided with test program and source code |
| Registry saving, support saving registry information when electricity adjusted | Convenient for user to debug | |
| LCD driver, support 320*240, 640*480, 800*480, 800*600, 1024*768 resolution; | Provided special LCD with debug service | |
| Touch screen driver, supporting 4-wire resistive screen | Provided with test program and source code | |
| SD card driver, supporting 2-wire SD card | Largest capacity support 4G | |
| Audio driver, support audio input/output and MIC input | Provided with test program and source code | |
| Nic driver, 10/100M self-adaptive, can be expanded gigabit nic | Provided with test program and source code | |
| PWM driver | Provided with test program and source code | |
| I2C driver | Provided with test program and source code | |
| SPI driver | Provided with test program and source code | |
| 232, 485 serial driver test | Provided with test program and source code | |
| support 8*8 matrix keypad, also can used as GPIO | Provided with test program and source code | |
| USB driver, support mouse, keypad, U disk, printer, WiFi, bluetooth, camera, barcode scanning, etc. | Support various USB external devices, provided with debug service | |
| PC Development Environment | Provided with supporting VS.NET 2005 development tools, Wince 6.0 plug-in | Convenient for user to next develop |
ATMEL AT91SAM9M10 Development Board Order Infomation
| Item | QY-9M10EK | ||
|---|---|---|---|
| Standard accessories | (1)12V/2A power supply (2)1-wire cross serial line (3) CD of DVD development (4)4-wire RS232 serial lines (5)mini cable (6)packing box | ||
| DVD resources | Linux | Compilers | Cross-compiler arm-linux-gcc |
| Tool software | Supporting terminal, writing, download tools | ||
| Device manual | Main components' datasheet of back plane | ||
| User manual | About all development and use | ||
| Image file | Image file of bootstarp, u-boot, kernel and file system | ||
| Test source code | Test routines and source codes of all interfaces | ||
| System source code | Including bootstrap, u-boot, kernel,?file system and QT source code | ||
| Schematic | Back plane's schematic in PDF format | ||
| Packaging library | Component packaging library of evaluation board | ||
| Windows CE | Tool software | Supporting terminal, writing, download tools, sync software | |
| Device manual | Main components' datasheet of back plane | ||
| User manual | About all development and use | ||
| Image file | Firstboot, Eboot, NK image file | ||
| Test source code | Test routines and source codes of all interfaces | ||
| BSP package | Related BSP board-level supporting package | ||
| SDK | Related SDK | ||
| Schematic | Back plane's schematic in PDF format | ||
| Packaging library | Component packaging library of evaluation board | ||
| LCD options(another pay) | 4.3'LCD module + 4-wire resistive touch screen + USB cable | ||
| 5.6'LCD module + 4-wire resistive touch screen + USB cable | |||
| 6.4'LCD + 4-wire resistive touch screen + USB cable + inverter | |||
| 7'LCD module + 4-wire resistive touch screen + USB cable | |||
| 8'LCD module + 4-wire resistive touch screen + USB cable | |||
| 10.4'LCD + 4-wire resistive touch screen + USB cable + inverter | |||
| Module options(another pay) | TTL to LVDS module | ||
| TTL to VGA module | |||
| Sales hotline | 86-571-87858811, 87858822 | ||
Embedded Development Board Application:
• Textile Industry, Numeric Control Industry, Automobile Electronics, Industrial Touch Screen Control System, Robot Vision, Media Deal Wireless Application, Digital Applicance, On-board Equipment, Communication Equipment, Network Terminal, etc.
Send Inquiry to This Supplier
Mrs. Sally Ma
Sales manager
Zhejiang Qiyang Intelligent Technology Co., Ltd.
Hangzhou, Zhejiang, China
* Email
Want the best price?
Post an RFQ now!
Business Type
Manufacturer, Trading Company
Year Established
2007
Factory Size
Below 1,000 square meters
Total Employees
51 - 100 People
You May Also Like
-
Honeywell 2MLF-DC8A MasterLogic-200 8 Channel Current Output Module, New HoneywelNegotiableMOQ: 1 Piece
-
Latest Electronic Components GEC034US$ 0.5 - 0.8MOQ: 1000 Pieces
-
A76L-0300-0035/TNegotiableMOQ: 10 Pieces
-
Mobile Phone IC Components SpreadtrumNegotiableMOQ: 50000 Units
-
Taiwan All Kinds Of Device For The Bathroom Home SupplyUS$ 0.7 - 1MOQ: 1000 Pieces
-
Best Price Wireless Bluetooth ModuleUS$ 4 - 6MOQ: 2000 Pieces
-
OP277-6 OP227 6AV6643-0BA01-1AX KeypadNegotiableMOQ: 1 Piece
-
AKE390B Industrial 3 Axes Analog Vibration Sensor With Over Current Protection From Reliable Shenzhen SupplierNegotiableMOQ: 1 Set
-
Original Manufacturer Long Range 13.56MHz Rfid Reader/writer Module Microchip ReaderUS$ 10 - 30MOQ: 1 Piece
-
30CM Rainbow Cable 40P Female to FemaleUS$ 0.001 - 10MOQ: 1 Piece
