TW68F French type 1V2 plug-in Remote Control Socket

Specifications

With CE certification
3500W, 230V/50Hz
suitable for French type plugs

 

TW68F plug-in switch/ receiver( French plug)

 

Specifications 

There are 1V1( one controllerand one socket), 1V2( one controller and two sockets), 1V3(one controller to control three sockets), 1V4( one controller with four sockets) for customers to choose.

INSTALLATION:

• Put the component in the wall switch, then connect the light or other part. 
• Self- learning of unit code in receiver, press the learn button on the receiver 

        and keep it pressed until the LED starts flashing.

• Then press the desired OFF button on the emote control and keep it pressed 

        until the LED on the receiver turns off.

Remove the code:

Press and hold LEARN button until the light flashes, release the button, and press LEARN button, all the information on the receiver will be deleted.

USE REMOTE CONTROLLER TO CONTROL SWITCHES

-Put the slide switch in to the right position

-Use ON to turn on switches

-Use OFF to turn off switches

-When pressing the buttons, the LED will light up shortly