Hakko soldering iron tester FG101

Model Name

HAKKO FG-101

Temperature

Resolution

1ºC(1ºF)

Measurement Range

0 - 700ºC (32 - 1300ºF)^*1

Precision

±3ºC (between 300 and 600ºC)/
±6ºF (between 572 and 1112ºF)
±5ºC/10ºF (other than above)

Sensor

K (CA) type thermocouple

Voltage

Resolution

0.1mV

Measurement Range

0 to 40mV (AC)

Precision

± (5% of reading +1 digit)

Registance

Resolution

0.1Ω

Measurement Range

0 to 40Ω

Precision

± (5% of reading +1 digit)

Display

LCD

3 1/2 digits

Burnout^*2

MAX HOLD

(Refer to "MAX HOLD function.")

Power Consumption

100V-2.6W, 110V-2.9W, 120V-2.6W,
220V-2.7W, 230V-2.8W, 240V-3.0W

Dimensions

200(W)x50(H)x120(D) mm /
7.9(W)x2.0(H)x4.7(D) in

Weight

1kg

Ambient Temperature/
Humidity Range

0 - 40ºC (32 - 104ºF), 20 - 90%RH
(Non condensation)

Environmental Condition

Applicable rated pollution degree 2
(According to IEC/UL61010-1)

^*1 Temperature sensor (191-212) can only be used to measure temperatures below 500ºC (932ºF). To measure higher temperatures, use an applicable temperature probe

When the tip is not in contact with the conduction plate.
^*2 When a sensor is not attached nor burns out, an alarm symbol of Burnout is displayed. If this alarm occurs, replace/attach with a new sensor. The same alarm symbol is also displayed when a value over the possible measurement range is detected.