Contact Platform Support
Help Center
Related Products
-
PE Electro Fusion Joint for Pre-insulated PipelineUS$ 30 - 55MOQ: 20 Pieces -
Polyethylene Electro Heating Fusion Tape / SleeveUS$ 30 - 55MOQ: 20 Pieces
-
Heat Shrinkable Sleeve / TapeNegotiableMOQ: 50 Pieces
-
Polyethylene Electro Fusion TapeUS$ 30 - 55MOQ: 20 Pieces
-
Heat Shrinkable SleeveNegotiableMOQ: 50 Pieces
Specifications
PE Electro Fusion Tape for Drainage pipeline1.Fusion strength:15.0Mpa
2.Good anticorrosion
3.Girth welding
4.Hot melt
PE Electro Fusion Tape for Drainage pipeline / hot melt Tape
It is a kind of special-purpose pipe connection, which is made by embedding specific electric heating melt welding wire in the basis of high quality PE sheet with special technicals.
Mainly used for Oil&thermal pipeline, such as Pre-insulated Pipes.
Performance characteristic:
good bonding strength, excellent seal, high air-tightness, no PU leak, corrosion resistant, aging resistant, and easy to operate. Electric hot melt sleeve is an emerging connect fitting in anti-corrosion and thermal insulating industries. Its largely outperforms heat-shrinkable strip in terms of aging-resistance, bonding strength, and ring stiffness, further more, it applies PU foam after melting the jacketed pipes, this process needs much less time than using a heat-shrinkable strip; therefore, electric hot melting sleeves are widely welcomed in joint coating and connecting of heat distribution pipeline and oil pipeline.
Features & Benefits:
- Waterproof; good sealing capacity;
- Able to withstand axial forces initiated by axial moments of the pipe in the ground;
- Able to withstand radial forces and bending forces; high tensil strength;
- Able to withstand effects of temperature and temperature variatations.
- Have the same thickness of the pipeline insulation layer.
- Could be used as drawing pipe scope of application: DN200~DN3000mm
Testing program | Required technical | Testing result | Testing method |
Appearance | The appearance of HDPE electric fusion sleeve is smooth and flat, no bubble, no split, no discolor because of decomposition; and the embessed fusion net is no disconnect and tilting. | pass | Tested by eye under the sunlight. |
Tensile strength | ≥13Mpa | 15.0Mpa | GB/T 8804.3-2003 |
Hydraulic pressure test | 20°C,0.1Mpa water pressure, no damage and leakage after 1 hour | pass | GB/T 6111-2003 |
Air leakage test | 20°C,0.1Mpa air pressure,no damage and leakage after 1 hour | Pass | GB/T 6111-2003 |
Send Inquiry to This Supplier
You May Also Like
-
High-BARRIER Plastic Wear-Resistant and Chemically Resistant for Various Projects in POK M330A PolyketoneUS$ 3.72 - 3.88MOQ: 25 Kilograms
-
High Recovery Gold Washing Carpet Mining Alluvial Gold Moss Mat Grass Carpet Gold Mining CarpetNegotiableMOQ: 10 Rolls
-
Bottle Sealing Lock Buckle Plastic Rings for Decorative Sealing BOLIUS$ 0.1 - 0.2MOQ: 10 Pieces
-
Vydyne 21SPF PA66 Resin for Automotive Connectors, High Flow, UL94 V-0 Flame Retardant GradeNegotiableMOQ: 25 Kilograms
-
LG PC/ABS Lupoy GN-5001RF Polycarbonate + ABS Resin Plastic Raw MaterialUS$ 1.5 - 2MOQ: 25 Kilograms
-
Hot Selling 5500m2/m3 MBBR Bio Filter Floating Media Biochip 30 for Ras AquacultureUS$ 150 - 480MOQ: 1 Cubic Meter
-
Pier Buoy Floating Box on Water Pontoon BridgeUS$ 12 - 15MOQ: 50 Pieces
-
16mm 19mm 25mm 38.1mm Round Square Tube End Leg Tip Plastic Pipe PlugNegotiableMOQ: 100 Pieces
-
Portable Pop up Privacy Shower Tent Spacious Changing Room for Camping Hiking Beach Toilet Shower BathroomUS$ 24.00MOQ: 1 Set
-
Shenzhen Runpeng Custom Injection ABS PP Plastic PartsNegotiableMOQ: 1
