Contact Platform Support
Help CenterPolyethylene Electro Fusion Tape
Related Products
Specifications
Polyethylene Electro Fusion Tape1.Fusion strength:15.0Mpa
2. Good anticorrosion
3. No PU leak
4. Aging resistant
Polyethylene Electro Fusion / hot melt Tape
It is a kind of special-purpose pipe connection, which is made by embedding specific electric heating melt welding wire in the basis of high quality PE sheet with special technicals.
Mainly used for Oil&thermal pipeline, such as Pre-insulated Pipes.
Performance characteristic:
good bonding strength, excellent seal, high air-tightness, no PU leak, corrosion resistant, aging resistant, and easy to operate. Electric hot melt sleeve is an emerging connect fitting in anti-corrosion and thermal insulating industries. Its largely outperforms heat-shrinkable strip in terms of aging-resistance, bonding strength, and ring stiffness, further more, it applies PU foam after melting the jacketed pipes, this process needs much less time than using a heat-shrinkable strip; therefore, electric hot melting sleeves are widely welcomed in joint coating and connecting of heat distribution pipeline and oil pipeline.
Features & Benefits:
- Waterproof; good sealing capacity;
- Able to withstand axial forces initiated by axial moments of the pipe in the ground;
- Able to withstand radial forces and bending forces; high tensil strength;
- Able to withstand effects of temperature and temperature variatations.
- Have the same thickness of the pipeline insulation layer.
- Could be used as drawing pipe scope of application: DN200~DN3000mm
Testing program |
Required technical |
Testing result |
Testing method |
Appearance |
The appearance of HDPE electric fusion sleeve is smooth and flat, no bubble, no split, no discolor because of decomposition; and the embessed fusion net is no disconnect and tilting. |
pass |
Tested by eye under the sunlight. |
Tensile strength |
≥13Mpa |
15.0Mpa |
GB/T 8804.3-2003 |
Hydraulic pressure test |
20°C,0.1Mpa water pressure, no damage and leakage after 1 hour |
pass |
GB/T 6111-2003 |
Air leakage test |
20°C,0.1Mpa air pressure,no damage and leakage after 1 hour |
Pass |
GB/T 6111-2003 |
Send Inquiry to This Supplier
You May Also Like
-
FR3010 Flame Retardant Polymer - Stress Crack Resistant Industrial GradeUS$ 2.9 - 3.3MOQ: 25 Kilograms
-
High Quality Hand Stretch Film Shrink Wrap Shipping Clear Plastic 18" X 1500 Ft Transparent Lldpe Packaging Film Green Packing BoliUS$ 9.5 - 10MOQ: 1 Kilometer
-
High Recovery Gold Washing Carpet Mining Alluvial Gold Moss Mat Grass Carpet Gold Mining CarpetNegotiableMOQ: 10 Rolls
-
Plastic Oval Protective Cap PlugNegotiableMOQ: 100 Pieces
-
High Quality Retort Autoclave Separator Sheet Extruding Plastic Modling Cutting Processing ServiceUS$ 10.00MOQ: 10 Sheets
-
Good Quality Sun Shadow Shade Sail Garden Plaza Yard Reinforced Corner Shade Sail for MexicoNegotiableMOQ: 100 Pieces
-
Hot Selling 5500m2/m3 MBBR Bio Filter Floating Media Biochip 30 for Ras AquacultureUS$ 150 - 480MOQ: 1 Cubic Meter
-
Custom Plastic Injection Electrical Products Custom Plastic Injection ServicesNegotiableMOQ: 1
-
Plastic Machinery Spare Parts Automotive Plastic Parts With Customizes ColorNegotiableMOQ: 1 Piece
-
19 mm pp Solid BallUS$ 0.08 - 0.08MOQ: 100 Pieces
