Home > Products > weighing controller > DEP105 4-20mA weighing indicator
DEP105 4-20mA weighing indicator
- 1000 Set / Sets per Month
- Shenzhen
- T/T Credit Card
- laser distance meter PD38
- HANDHELD LASER DISTANCE METER,HANDHELD RANGE FINDER, DISTANCE METER,PD23,40M
- HANDHELD LASER DISTANCE METER,HANDHELD RANGE FINDER, DISTANCE METER,PD54,40M
- HANDHELD LASER DISTANCE METER,HANDHELD RANGE FINDER, DISTANCE METER,PD56,60M
- Laser Range Finder PD58
- laser distance meter HP800
Product Details
Place of Origin: | Hunan, China | Brand Name: | DETAIL | Model Number: | DEP105 |
Product Description
DEP105- weighing indicator
Model reference
MODEL | Weight indicate | 4 Point Relay | 0-10VDC/ 4-20MA output | Peak reserves | RS485/RS232 | Packing scale | Batching scale |
DEP105 | YES | NA | NA | YES | YES | NA | NA |
DEP105A | YES | NA | YES | YES | YES | NA | NA |
DEP105C | YES | YES | NA | NA | YES | NA | NA |
DEP105CA | YES | YES | YES | NA | YES | NA | NA |
DEP105P | YES | YES | YES | NA | YES | YES | NA |
DEP105B | YES | YES | YES | NA | YES | YES | YES |
Standard Function:
Input Signal | DC and DV signals of electrical resistance strain gage, weighing cell and proliferated silicon pressure sensor |
Display Mode | 5-bit 16mm high light LED display |
Comparing Control Output(option-able optional) | 4-point comparing output, 6 optional comparing modes, adjustable sensitivity of comparison value and comparing control output |
Analog Output(, optional) | 4mA – 20mA photoelectric isolation output of gross weight |
BCD Output(optional) | Parallel 29-bit non-isolated TTL level output or isolated OC output |
Communication Interface(optioanl) | Standard RS-485 and RS-232 interfaces, adjustable address and rate |
Display Output(optioanl) | 6-line differential transmission, adjustable frequency of transmission, distance of 1200m |
Digital Filtering | To filter high frequency small amplitude interference to ensure stability and accuracy of indication. |
Zero Tracking and Automatic Reset | Reading will be tracked until zero if weight is in the range of zero tracking and kept over 1 second. |
Change Detection | Reseting, shelling and tracking will not be executed until change of measured value in 1 second is beyond preset graduation value. |
Optional Output Control | Control power of comparing output and analog output can be granted to computers or meters after communication interfaces are determined. |
External Reset | Command of external reset is executed through on-off input. |
Printing Interface(option-able) | Manual and timing printing |
Price, Package and Service
1. Price : EXW, FOB, C&F
2. Payment: T/T in advance, PayPal, Western Union.
3. Packing : standard export packing, including instructions and certificate
4. Leading time : 3-7 working days according to order quantity
5. OEM available
6. Shipment: Express (FedEx, DHL, UPS & TNT) or forwarder
7. 7 days free replace & 1 year free repair for quality warranty
FAQ
Q1:Can I have a sample for testing?
A: Yes, you can have samples from us.
The cost of samples will be higher than the cargo.
Q2:How can I get the after-service?
A:We will send you the spare parts by free if the problems caused by us.
If it is the men-made problems,we also send the spare parts,but you should pay.
Q3:Do you have inspection procedures for all load cells?
A:100% self-inspection before packing.
I am Dita, thank you for visiting our website. Any inquiries, please contact us freely.
We will reply to you within 24 hours.
Contact Us
- Hunan Detail Sensing Technology Company Limited
- Contact nameDita Chen
- Phone86-731-89908126
- AddressRm. 423, Bldg. H, Feicui Garden, Jinrong Yufeng, No. 209, Lulong Road, High-Tech Development Zone
dynamic torque sensor | fiber optic sensors | load cell | New Products |
pressure controller | pressure sensor | pressure switch | proximity sensors |
Strain Gauge | temperature sensor | weighing controller |
- ASTM D3427 IP313 DIN51585 Measurement of the ability of lubricating oil to separate atomized air
- ASTM D5800 DIN51581Lubricant Evaporation Loss Measuring Instrument
- Belt Tension Meter Non-contact measuring occurs by infrared light
- Not Go Gauge for G9 Base 7006-129A-1
- Go Gauge for G9 to check the maximum base outline 7006-129-2
- Go and Not Go Gauge for GZ10 LED energy-saving Lamp Double Pin Bases 7006-120-1
- IEC60061-3 GU10 GO AND NOT GOGAUGE FOR BASES 7006-121-1
- IEC60335-2-9 Figure 102 Load for testing rotating spits mass 4.5kg
- 7006-27G-1 Go Gauge For Dimension S1 of E14 Caps On Finished Lamps
- 7006-55-2 Gauge For Finished Lamps Fitted With E14 Caps For Testing Protection Against Accidental Contact
- 7006-54-2 Gauge For Finished Lamps Fitted With E14 Caps For Testing Contact Making
- 7006-27F-1 Go Gauge For E14 Caps On Finished Lamps
- 7006-28B-1 Not Go Gauge For E14 Caps On Finished Lamps
- IEC60068-2-75 Table 1 and Table 2 Steel Striking elements with Energy of 2J、5J、10J、20J、50J
- IEC60335-2-6 Clause 22.120 a hammer with an angle of 60° mass 75g for glass fragmentation test
- UL1598 Clause 19.5.3 、IEC60598 Annex K1 Ambient Temperature Measurement Cylinder
- IEC60335-2-80 Figure 102 Test Pin simulate wear on the bolt for the Ceiling Fan
- EN60350-2 Standardised cookware with lid for energy consumption and heating up time testing
- UL60335-2-24 Figure 101.DVA.2 Articulate Probe with Flat and Cone Shaped Simulate as Children's Hand 10.5-11.5 Year Age
- UL 1017 Clause 4.16.3.1 Figure25、Figure26 Accessibility Probe for Openings
- UL60335-2-24 Figure 101.DVA.1 Articulate Probe with Flat and Cone Shaped Children's Hand 3.5-4.5 Year Age for Moving Parts
- IEC62133-1 Figure 2 、IEC62133-2 Figure 3 Small cell and battery safety Ingestion Gauge
- IEC60335-1 Clause 21.2, IEC60950-1 Figure 2K Abrasion Resistance Test for Coating Layers, 40° Scratches Pin
- IEC60335-2-9 figure 103 ,IEC60335-2-6 Figure 101 Unpolished Aluminium Vessels with Lids for Hotplates and Hob Elements Test
Popular Searches
- xk3190 a9 weighing indicator
- copper/copper sulfate reference electrode
- glassy carbon electrode
- thermocouple head ksc
- adjustable thermostat 12v dc
- light weight steel
- bull eye level
- bulls eye level
- black mesa
- bloco
- Cast Iron Block
- class testing
- celtron load cell
- hf testing
- instrument accessoris
- jewelry scale calibration weights
Recommended Products
- ASTM D5264 Ink Decolorization Test Machine Label Ink Rub Tester Paper Abrasion Resistance Testing Equipment
- Programmable Environmental Testing Machine Climatic Aging Test Chamber Temperature Humidity Test Machine
- Body Fat Scale eF-707B4 Weighing scale bmi Scales Digital Weightand Body Fat, Digital Scales for Body Weight, Bathroom ScaleBody Fat Scale, Large LCD Display, Analyzer with SmartphoneApp 400lbs
- Stainless Steel Constant Temperature And Humidity Test Chamber Climate Test Machine Environmental Testing Box
- Good Supplier Index Meter Rubber Melt Flow Rate Test Machine Index Tester Index Test Instrument
- Body Fat Scale Digital Bathroom Scale BMI Smart Scale Fat Scale Weight Scale Bluetooth Electronic Body Composition Scale Most Accurate Synchro with app, 400 LBS
- Acrel Insulation fault locator Accurately locate the circuit where the insulation fault is located AIL150-4
- Acrel Using CAN bus technology, insulation faults of 8 circuits can be located Insulation fault locator AIL150-8
- Acrel ADF400L-3D 3 circuits single phase 10(80)A High accuracy
- Acrel ADF400L-4H Multi Circuit Electrical Instruments 4 channel 3 phase 3*1(6)A High installation flexibility
- Acrel Multi Circuit Electrical Instruments 2 channel 3 phase 3*10(80)A ADF400L-2S din rail
- Acrel din rail Multi Circuit Electrical Instruments 6 channel single phase 10(80)A High installation flexibility ADF400L-6D
Find Similar Products By Category
- Measurement & Analysis Instruments > Instrument Parts & Accessories
- Buy on GoldSupplier.com
- How to Buy
- Browse by Catagories
- Browse by Hot Regoins
- Private Sourcing Events
- Sell on GoldSupplier.com
- How to Sell
- Post Products
- Manage Products
- Manage Groups
- About
- About Us
- Link to Us
- Contact Us
- Sitemap
- Please Enter your Email Address
- Please enter the content for your inquiry.
We will find the most reliable suppliers for you according to your description.
Send Now-
Dita Chen
Welcome to my shop! Glad to serve you!Please send your question!
Your message has exceeded the limit.
Your message has exceeded the limit.
-
-
Your inquiry content must be between 20 to 5000 characters.Send Now.
-
Please input the mailbox.
-