3M™ Adhesive Transfer Tape 9469PC

3M industrial tape 9469PC processed in China,size is 48 IN × 60 YD.

Product Description:

Construction  Information:

                                       3M™ VHB™ Adhesive Transfer Tapes   
Products                            F9460PC     F9469PC      F9473PC

Adhesive Thickness         0.002 in.       0.005 in.        0.010 in.
                                         (0.05 mm)    (0.13 mm)      (0.26 mm)

Liner Material                   58# polycoated Kraft
                                           0.004 in. (0.10 mm)

Electrical and Thermal Properties:

Products                                                                              3M™ VHB™ Adhesive Transfer Tapes
                                                                                           F9460PC        F9469PC         F9473PC
Thermal Coefficient of Expansion                                           770 x 10-6 mm/mm/°C
Thermal Conductivity (ASTM C-177)                                     0.092 BTU-ft/ft2 Hr °F (0.0016 Watts/cm °C)

Dielectric Strength                                                          23°C    125°C  175°C 23°C 125°C 175°C 23°C 125°C 175°C
(Volts per ASTM D-149-97A)                                         1200    1000    1000   3000  2600   1900   5500  N/A      N/A 
 
                                                                                             
Insulation Resistance (ASTM D-1000)                               > 1 x 106 megaohms/in2

Density                                                                            0.04 lb/in3 (0.98 g/cm3)

Application Techniques:

Bond strength is dependent upon the amount of adhesive-to-surface contact developed. Firm application pressure helps develop better adhesive contact and improve bond strength.

To obtain optimum adhesion, the bonding surfaces must be clean, dry, and well unified. Some typical surface cleaning solvents are isopropyl alcohol/water mixture or heptane.*

Ideal tape application temperature range is 70°F to 100°F (21°C to 38°C). Initial tape application to surfaces at temperatures below 50°F (10°C) is not recommended because the adhesive becomes too firm to adhere readily. However, once properly
applied, low temperature holding is generally satisfactory.

Product Use:

Many factors beyond 3M’s control and uniquely within user’s knowledge and control can affect the use and performance of a 3M product in a particular application. Given the variety of factors that can affect the use and performance of a 3M product, user is solely responsible for evaluating the 3M product and determining whether it is fit for a particular purpose and suitable for user’s method of application.

  Features:

Application Techniques:

Product Use:

All statements, technical information and recommendations contained in this document are based upon tests or experience that 3M believes are reliable. However, many factors beyond 3M’s control can affect the use and performance of a 3M product in a particular application, including the conditions under which the product is used and the time and environmental conditions in which the product is expected to perform. Since these factors are uniquely within the user’s knowledge and control, it is essential that the user evaluate the 3M product to determine whether it is fit for a particular purpose and suitable for the user’s method of application.

 Other Products

Acrylic(VHB) Tape                                    3M 9495MP

Masking Tape                                           3M 468MP

Die Cutting

3M shelf life statements on select converter markets products:

The shelf life note placed on the 3M technical datasheets for 3M pressure sensitive adhesive (psa)
products, including the following products produced by 3M’s Industrial Adhesives and Tapes Division
for 3M Converter Markets customers:

• 3M™ Adhesive Transfer Tapes (single and double linered versions)
• 3M™ Differential Double Coated Tapes
• 3M™ Double Coated Tapes (single and double linered versions)
• 3M™ Membrane Switch Spacers

This policy is specifically related to the adhesive tape in the roll form as produced by 3M. The intent of this shelf life note pertains to roll stability. In this form, 3M takes into consideration variables such as unwind, liner release, and edge ooze. These are areas that may affect converting operations but do not reflect changes to material properties of the adhesive tape.
Therefore, the shelf life note is intended for the storage of the unconverted 3M product. For example, 3M does not provide a shelf life recommendation for the final application such as a nameplate or overlay once it is converted. Thus, the decision for when to apply the final adhesive laminated part is left to the discretion of the converter and/or the end user.
3M's adhesive tapes have been designed for bonding to many different surfaces and have a long history of use in the following markets; aerospace, medical, industrial equipment, automotive, appliance, light industrial, graphics, print and print finishing, web processing and electronics.
Please note this technical bulletin is being provided to offer additional clarity on the long-standing intent of our shelf life policy.

Certifications

Each roll packed with Poly bag / Blister card / Double blister in standard export cartons.