2013 new solar outdoor sensor light

Specifications

solar outdoor sensor light
1. Electricity saving
2. Solar
3. Sensor

 Solar outdoor sensor light 

 

Model no.: X645E

 

1. Solar powered lighting, no electricity bill.

2. 45 x 5mm super bright LEDs.

3. Motion detection at a distance of up to 50 feet.

4. Solar outdoor sensor light  Adjustable light panel.

5. Auto illumination from dusk to dawn, high-efficiency,

rechargeable lithium battery produces zero emissions

 

 

 

 

With its easy setup and lightweight design, this conforms to most of your lighting needs. It is the most cost-effective way to illuminate and protect areas around your home, business and recreational area, especially where AC is not accessible. Auto dusk to dawn

EZ installation - NO AC required, no electricity bill

14 hours of continuous illumination on a full charge

Detaches from its wall plate for convenient portable use

Functions in extreme environmental conditions

15 ft. wiring allows placement of the solar panel in an optimal location

Rechargeable battery lithium polymer 7.4V/1500mAh is included

 

 

X645E functions by converting solar energy into electricity energy. When the weather is sunny, the interior accumulator of the sensor lamp is supplied by the solar energy board. During the night it’s powered by the accumulator. When it has been rainy or cloudy for some days and the interior accumulator’s power of sensor lamp is not enough, you can use a power adapter (not supplied) to charge.

 

Solar energy:
Install it at a position where sunshine is not blocked.
Connect the solar energy panel with the cable to the DC adapter connection of the sensor lamp.
Sensor lamp:
Install it at a position where the detection of persons by the sensor is sideward’s and not frontal. The sensitivity of the sensor is much higher when persons pass the sensor from the side. The sensitivity of the sensor is very low if persons are approaching the sensor frontal.