Contact Platform Support
Help CenterPir Detector Switch
Related Products
-
Wide Angel Pir Ceiling Sensor Switch , Adjust Distance and TimeUS$ 4 - 5MOQ: 100 Pieces -
China Motion Sensor Switch for Ceilling , With Best PriceUS$ 4 - 5MOQ: 100 Pieces
-
Indoor Light Sensor Switch , Saving EnergyUS$ 4 - 5MOQ: 100 Pieces
-
Round Shape Pir Switch Adjust Delay Time and Lux Freely ,factory PriceUS$ 4 - 5MOQ: 100 Pieces
-
Best Price Good Working PIR Sensor Switch SupplierUS$ 4 - 5MOQ: 100 Pieces
Specifications
pir detector switchon celling 360 degree:
round cover high sensitve
load power 800W
consumption less than 0.02W
pir detector switch
Intelligent infrared sensor switch is pyroelectric infrared sensors, daylight detection sensor, High sensitivity and reliability.
This switch is especially suitable for classrooms, schools, libraries, offices, hospitals, computer room,
meeting rooms and other public places.
pir detector switch Features:
1.auto-sensing, entering the region, the lights, leaves auto delay off.
2.during each effective, human activities will cause a delay sensing switch automatically extended time period.
3.Adjustable light intensity: adjustable CDS.
4.Delaytime adjustable.
pir detector switch Technical parameters:
1.Operating voltage: 110VAC or 220VAC.
2.sensing distance: the largest mounted side wall 7 meters (adjustable).
3.Load type: fluorescent, LED energy saving lamps, all kinds of lamps.
4.Power consumption: < 0.25W
5.Load power: < 600W
6.Detection angle:110 --- 140 degrees
7.Open the light intensity setting range :1-250LUX (adjustable)
8.Output Delay: 30 seconds --- 30 minute (adjustable)
9.Ambient temperature: -10 ~ +50 °C
10.Product Size: φ95 × 35mm
11.Contact the working life: 50 million
pir detector switch Instructions for use:
1. according diagram connected switch, power warm-up time about 2 minutes. After warm-up, the switch enter
normal operation. When daylights, the switch automatically closed.
pir detector switch Use Note:
1.Wiring installation shall not be charged, non-load short-circuit, to be installed after the power.
2.Strict accordance with the wiring diagram wiring, if a wrong can damage the switch, resulting in power line fault.
3.Prohibited use of super-power range, otherwise it will burn switch.
4.Installation environment: switch installation location as possible from the load is greater than 1 meter, not the
switch installed in direct sunlight or air flow areas. Switch can not be placed where there are high-power radio
frequency radiation (example: radio, radio, the antenna).
Send Inquiry to This Supplier
You May Also Like
-
PEPPERL+FUCHS NJ1,5-8GM-N Inductive Proximity SwitchNegotiableMOQ: 1 Piece
-
Good Price Ivan Zoneko Auto Parts Transfer Switch OEM MR580154 For Mitsubishi Pajero Montero V93 6G72 V96 4M40 V97 6G75 V98 4M41NegotiableMOQ: 1
-
SMS Pump Controller Light Power SwitchUS$ 1 - 10MOQ: 1 Piece
-
PCB REED SWITCH/ REED SENSORUS$ 0.4 - 0.9MOQ: 100 Pieces
-
TCRT1000 SwitchUS$ 10 - 1,000MOQ: 1 Piece
-
LEV04001 Electric Cable Liquid Switches Cable SensorsUS$ 5 - 6.9MOQ: 10 Pieces
-
Schmersal Safe Switching and MonitoringNegotiableMOQ: 1
-
Smart SwitchNegotiableMOQ: 60 Pieces
-
Intrinsic Safety Barriers DIN35 Standard Rail HD5500 Series Case Thin to 12.5mmUS$ 50 - 80MOQ: 1 Case
-
Mechanical Cable Float Switch (PC-8B)US$ 10 - 11MOQ: 50 Pieces
