Rechargeable electronic boundary control & electric fence for house

Specifications

Combination function of electric fence for house
and remote dog training system
.Long range up to 300M remote trainer

  Electronic boundary control electric fence for house

 

Product Description:

 

      DF113R Inground pet fencing system  Main Feature:

 

     1.Combination function of the in-ground fence system and remote training system .

 

     2. Train up to 3 dogs from the same remote trainer, long range up to 300 meter in open field

 

     3.10 levels each of continuous and momentary stimulation

 

     4. “Buzz” sound activated with a separate button

 

     5. Two buttons “+” and “-” allow you to set intensity

 

     6.  Dog selection buttons allow you to select dog

 

      7.  LCD digital display for 10 stimulation levels and dog ID

 

      8. 10 seconds safety stimulation . Receive collar stop shock automatically when pets get stuck

           in correction zone more than 10 seconds .

 

      9.  Audible wire-break alarm

 

      10. Beep warning with 4 levels of shock correction

 

      11.  Pets pass through In Ground Fence System safely without any shock corrections .

 

      12. 100M wire , 50 PCS flags and 2 Adaptors included

 

      13. Water-proof receiver and remote trainer

 

      14.  Rechargeable receive collar and Remote Trainer (rechargeable 3.7V Li-ion battery)

 

      15 .  LED low power indication, red light flash when battery is low.

       

 

DF113R In ground fence system Spec

 

 

Model	DF113R
Remote Control Range	300 meters
Frequency	433MHz
Boundary wire Length	Up to 500 meters
Receive collar size	7.4*4.1*4.1CM
Receive colar weight	70 gram
Strap type	75CM length TPU strap
Remote Trainer battery	545mAh 3.7V Li-ion rechargeable battery
Receiver battery	550mAh 3.7V Li-ion rechargeable battery
Receiver stand-by time	70~75 hours
Shock levels	10
Multi-dog system	Up to 3 dogs
Waterproof level	Trsansmitter: IP6 ; Receiver: IP7 ,dog can swim
Certification	CE&Rohs
Warranty	2 years

 

 

 

Operation Guide:

 

1.Fence transmitter

 

 

Boundary Width Control Switch : Adjust the Boundary Width--- the combination of Warning Zone and Static Correction Zone

 

Boundary Wire Terminals : The terminals where the Boundary Wire connect to the Fence Transmitter in order to complete a continuous loop

 

Power Light: The light that indicate the power on or not

 

Loop Indicator Light: The light that indicates the Boundary Wire make a complete loop enabling the signal to be transmitted.

 

Power Jack: The jack where the Power Adaptor plugs into the Fence Transmitter . The Transmitter is powered by 18V DC Power

 

 

2.Remote Trainer

 

 

 

 

 

 

DOG PASS THROUGH FENCE SYSTEM MODE :

 

 

DF-113R Fence System allow you to set up safe mode that dog can pass through Fence

 

System without any shock corrections.

 

 

1. Enter Safe Mode: Press “ - “ and “ Momentary shock” Button of Remote Trainer at

 

the same time , The Receive Collar will beep 3 sounds , Then 1 beep per 1 second . Dog

 

can pass through Fence system without any shock corrections .

 

 

 

2. Exit Safe mode: Press “- “ and “Momentary ” Button of Remote Trainer at the same

 

time again . The Receive Collar will beep 3 sounds . Then, Receive Collar return to normal

 

shock correction .

 

 

 

Packing:

 

 

Gift Box and blister , 20sets/carton , carton size :71X69X39CM

 

 

 

Packing list:	1*Fence Transmitter 1*18V DC Adaptor for Fence trainsmitter 1*Remote dog trainer 1*Receive Collar 1*5V1000mA DC Adaptor 1*TPU Strap 1*Test Lighter 1*2 Pins USB Cable 1*Lanyard for Transmitter 1*Manual 2*Boundary Wire Connector 1*100m Boundary Wire 50*Flag 2*Long Prongs 2*Short Prongs 1*Spanner for changing prong
Packaging:	Each packing in gift box
QTY/CTN	20 pcs
CTN Size	71X69X39CM

 

 

 

 

FAQ:

 

 

 

Problem#1: The Receive Collar seems can’t receive any signal or can not work at all

 

Check the Receive Collar on/off button, make sure the Receive Collar is turned on.

 

Check the Remote Trainer battery, Low power or not ?

 

Recharge the Remote Trainer or charge the Receive Collar if needed.

 

 

Problem#2: The Receive Collar has to be held on the top of Boundary Wire to activate

 

The batteries have run down. Make sure the batteries are well charged.

 

Adjust the Boundary Control Switch knob clockwise to increase the Boundary width..

 

 

Problem#3: Have an inconsistent signals for receive collar.

 

Make sure Fence Transmitter is at least 3 feet from large metal objects or appliance .

 

Make sure all Boundary Wire turns are gradual

 

Make sure the Boundary Wire is not running parallel to and within 5 feet of electrical wires ,neighboring containment system, telephone wires , television or antenna cables ,or satellite dishes

 

Photos and CE: