Stalk/straw wood pellet mill maker

Stalk/straw wood pellet mill maker               

1.  Introduction of straw wood pellet mill maker      

straw wood pellet mill maker is mainly made of any wood waste and biomass particles, such as wood sawdust, wood shavings, wood chips, wood logs, straw, rice husk, coffee husk etc. At a wood pellet plant, raw material need to be well prepared before pelletizing, then get dried, compressed, and formed into small eraser-sized bits, the wood pellets get from wood pellet plant are clean, pleasant smelling and smooth to touch.

The raw materials :

sawdust, rice husk, cotton stalk, cottonseed skins, weeds, crop stalks and other plant wastes, especially low-bonding and unformed materials.

It adopts imported SKF or NSK bearings, the motor brand is Siemens or china famous Wannan brand.

Driven by gear .more strong than by belt, and the capacity 10% higher than by belt. 

It is also matched the safty equipment , once overload , the safty pin will crack, to protecting the machine lifetime.

2. Wood Pellets Benefits   

a). Compared with raw wood shavings, there is less ashes and emission after combustion, carbon neutral without exacerbating the global warming. 
b. Raw materials are easy to get. Wood materials, agricultural byproducts, even wood wastes from wood processing factory can be utilized to make wood pellets.
c. Easy to ignite due to low moisture content. Efficient burning and high heat output. 
d. Can be used in a lot of appliances such as stoves, furnaces,boilers and other heating systems. 
e. Highly compressed, regular and uniform shape ensure easy storage and transportation, especially convenient for automated heating system.

3. Features of straw wood pellet mill maker       

1. It’s mainly used to produce wood pellets, widely used in many factories, and it can make very firm pellets for burning. The machine uses SKF imported bearing and Siemons motor.

2. Adamant structure, beauty appearance, high capacity, low power consumption, easy operation, reliable working, low dust ash and so on.
3. This machine has many sizes of ring die; it can make 2mm, 3mm, 4mm, 5mm, 6mm, 8mm, 10mm, 12mm pellets. Customers can choose the suitable size according to the demand.
4. The machine adopts speed-adjustable motor to feed the raw materials into pellet machine. There are over-protection device and strong magnetic security device. It also has oil lubricating system.

4.  technical parameters of straw wood pellet mill maker    :

The mould: 6,8,10mm

Picture for straw wood pellet mill maker  

Please feel free to contact me for more details about straw wood pellet mill maker   , you will get prompt reply,tks. 

Website: