Contact Platform Support
Help CenterHDPE Geomembrane for Waterproof 1.0-3.0mm Price
Related Products
HDPE Geomembrane
Features:
1.All physical factors such as anti-draw, anti-tear, and anti-stab meet the requirement of water works, chemicals, tunnels, and transportation project in most conditions.
2.Good aging, durable performance, and wide temperature arrange, it can be useful over thirty years on the condition of -60æ«60æ.
3.Anti-stab and fine friction factors.
4.Canker proof, acid and alkali proof, untoxic.
5.Lower cost per unit area, cost is 1/3«1/2 lower than that of PVC film, glass and cloth.
6.Convevient to install and dependable effect.
Specification:
Breadth:1-7m Thickness:0.2-2.5mm
Technical Data
Ordinary High Density Polyethylene Geomembrane (GH-1 Type)
Item |
Index |
||||||||
Thickness, mm |
0.30 |
0.50 |
0.75 |
1.00 |
1.25 |
1.50 |
2.00 |
2.50 |
3.00 |
Density, g/cm3 |
0.940 |
||||||||
Yield strength (MD/CD), ≥N/mm |
3 |
5 |
8 |
11 |
13 |
16 |
22 |
26 |
33 |
|
Break strength (MD/CD), ≥N/mm |
5 |
8 |
12 |
17 |
20 |
24 |
34 |
40 |
51 |
|
Yield elongation (MD/CD), ≥% |
/ |
/ |
/ |
11 |
|||||
|
Break elongation (MD/CD), ≥% |
450 |
||||||||
Right angle tear strength (MD/CD), ≥N |
24 |
40 |
60 |
80 |
100 |
120 |
160 |
200 |
240 |
Puncture-resistant strength, ≥N |
51 |
85 |
125 |
170 |
200 |
250 |
340 |
400 |
500 |
Carbon black content, % |
2.0-3.0 |
||||||||
Environmental Smooth High Density Polyethylene Geomembrane (GH-2S Type)
Item |
Index |
||||||
Thickness, mm |
0.75 |
1.00 |
1.25 |
1.50 |
2.00 |
2.50 |
3.00 |
Density, g/cm3 |
0.940 |
||||||
Yield strength (MD/CD), ≥N/mm |
11 |
15 |
18 |
22 |
29 |
37 |
44 |
Break strength (MD/CD), ≥N/mm |
20 |
27 |
33 |
40 |
53 |
67 |
80 |
Yield elongation (MD/CD), ≥% |
12 |
||||||
Break elongation (MD/CD), ≥% |
700 |
||||||
Right angle tear strength (MD/CD), ≥N |
93 |
125 |
160 |
190 |
250 |
315 |
375 |
Puncture-resistant strength, ≥N |
240 |
320 |
400 |
480 |
640 |
800 |
960 |
|
Environmental stress cracking time (single point of incision constant load stretching), ≥h |
/ |
300 |
|||||
Carbon black content, % |
2.0-3.0 |
||||||
Oxidation induction time (OIT), min |
Standard OIT≥100 High pressure OIT≥400 |
||||||
|
Oven aging at 85℃ Standard OIT retained after 90 days, ≥% |
55 |
||||||
|
UV resistance OIT retained after 1600hrs, ≥% |
50 |
||||||
Send Inquiry to This Supplier
You May Also Like
-
GeomembraneNegotiableMOQ: 2700 Rolls
-
CE and ASTM Self Bituminous Adhesive Waterproof Membrane for Roof, Window, Door, Road, Bridge, Ship Deck Anti Corrosion Protection Pipe TapeNegotiableMOQ: 100 Rolls
-
1.5mm Thick UV-resistant Geomembrane High Strength Waterproof Membrane for Dam and Canal Lining BOLIUS$ 0.15 - 0.20MOQ: 10 Square Meters
-
Non-curable Rubber Paint Rubber Asphalt Waterproof Coating Made in ChinaUS$ 1.5 - 6MOQ: 500 Kilograms
-
Low Cost Waterproof Material ManufactureUS$ 1,000 - 50,000MOQ: 1 Set
-
PTFE Architectural Membrane MaterialNegotiableMOQ: 1
-
Special Compound BaseUS$ 0.12 - 0.25MOQ: 7000 Square Meters
-
PolyLock/HDPE Lock/ E Lock/ HDPE E Lock/Geomembrane Attaches HDPE GeomembranesUS$ 10 - 50MOQ: 1 Piece
-
Breathable House Wrap Membrane Roofing Waterproofing MembraneUS$ 0.42 - 0.42MOQ: 5000 Square Meters
-
<MIicroVENT> Waterproof Vent MembraneUS$ 0.1 - 3MOQ: 10000 Pieces
