decorative outdoor water garden granite fountains centerpiece

Specifications

Euro style design
Estimated time:3-4hrs
Competitive price
Durable material 10years lifetime
Professional after-sale service

 

 

Size	Measurement (cm)                                 Lx W x H			Weight (KGS)	Carton Packing
					Qty/Ctn	Qty/40HQ	Carton Size
	72	72	150	19	1	315	76	76	38

 

ASSEMBLY INSTRUCTIONS

1.Unzip the contents of the box and to ensure that all elements are taken into account and in good condition.

2.Select a flat level surface for the source.

3.Put the base on the ground making sure your level. (keep the connector in position vertically). Align and connect the connector of the base of the pedestal with the lower connector at the top of the base and the base is aligned and then turn to the right to block. Align and connect the basin in the pedestal connected below, turn to the right to block. The power cable of the pump through the tube at the base of the cable supply cable to the notch in the lower part of the base. (p. 1)

4.The water supply pipe of the pedestal. Align and connect the connector with the connector in the middle basin of the upper half and half pedestal pedestal is aligned and then turn to the right to block. Connect the end of the water supply pipe to the central pedestal to the outlet tube of the pump, and the pump on the floor near the basin of the tube of the marrow of the basin of the fountain. Align and connect the pedestal means which connects with the middle basin of the basin of the fountain. Align the lower tenon in the basin with the notch in the edgeof the lower part of the pedestal. Please see the arrow sign shown in the upper left of the figure. 2 (p. 2)

5.Connect the plastic tube into the hole of the pipe in the upper part of the middle basin, then align and connect the upper pedestal in the middle basin. Align the upper connector with the connector at the top of the pedestal top and place the upper part of the plastic tube in the hole of the tube below the upper basin, then turn right to block. (p. 3)

6.Water supply pipe connected to the lower cover, which is the source for the hole of the tube at the top of the upper basin. Add clean water in the basin. The water level should be approximately 1 inch (25 mm) below the upper edge of the basin.(p. 4)

7.Connect the power cable to a GFCI outlet pump and water will begin to flowthrough the source.

8.To eliminate the possibility of water damage about the source, check if there is leakage and splashing in excess after the initial configuration of the source. If the water flow of the river is unequal, then check to see if the source is level. It is highly recommended that source is placed in an area where there may be damaged if the area to be wet and unstable.

9.Don't leave your source of operation for long periods of time when no one ispresent to observe the discharge and water level.

10.Check the area around the source on a regular basis to ensure that no leakage.Check the water level regularly to ensure that the pump is completely submergedduring operation.

 Package

 

  Others Like

Please find more from this link  http://greenfancycn.en.china.cn/productgrouplist-222217301-1/Fountain.html?isGallery=Y

 

 

 

 

 

 

 

-------------TERMS & CONDITIONS-------------

 

Payment: 
We usually accept T/T(with 30% deposit, the balance before shipment); 
L/C at sight, please send email to negotiate payment term if you can not accept T/T or L/C

 Packing: 

Option A: plastic bag in pallet
Option B: carton
Option C: According to cutomers' requirements

 

 

 

 

 How to make an order? 

1.Sample approval .
2.Client make 30% deposit or open LC after receiving our PI .
3. Client approve our sample, and get the testing report if any necessary .
4.Production .
5.Client approve our shipping sample .
6.Arrange shipment .
7.Supplier arrange necessary documents and send copy of these documents .
8.Client finish the balance payments .
9.Supplier send original documents or telex release the goods.

 

 Customer Service   

1. How to contact with us?

Answer(1): send us an e-mail. greenfancycn (a) / greenfancycn2(a)

Answer(2): trade manger online chat: Season Chan/Cola Yu/Gray Wong/James Chan
Answer(3): cellphone: 86-13924881817/ 86-18823115813 

 

2. Can you send a sample for reference? 
We are glad to send samples for your inspection. But you may need to pay the express fees. 

3. How to confirm the quality with us before start to produce? 
(1) You can get a sample, and then we make the quality according to that. 
(2) Send us your samples, and we make the fabric according to your quality. 

4. How to solve the quality problems after sales? 
(1) Take photos of the problems and send to us. 
(2) Take videos of the problems and send to us. 
(3) Send back the physical problem fabrics by express to us. 
After we comfirm the problems, such as caused by machine, dyeing, etc, Within three days, we will draw up the satisfied program for you.