Automatic print slot machine

Detailed Product DescrAfter the numerical control grinding the wall-plate, important part of the whole machine are made by the high precessing center.

A)   Sun chrome plating.

c)      Scale shows the space betweeen the upper and lower paper feeding roller, worn-wheel adjusting, the scope is 0-12mm, adopts crosshead connection, the gears keeps meshing while adjusting.

1. Phasing adjustable structue

a)      Differential action planetary gear

b)      The printing phasing adopts PLC and electrical digital adjustment ( no matter the machine are working or stopping).

c)      For the horizontal position, the scale type manual adjusting.

d)      Each printing unit can find its former position before stopping, which can achieve fast correcting.

1. Inking circulating

a)      It adopts pneumatic diagram pump for inking, stable and easy to operate and keep in good repair.

b)      The inking filter net to filter the inclusion.

c)      Automatic distributing the ink device, without stopping the ink while machine stops, can prevent the ink going

d)      The ink cup prevent

e)      Steel ink fountain, automatic inking and circulating c

C)   slotting machine

1. Electrical adjustment the horizontal moving of the four slotting knives pedestal.
2. Synchronous adjustment the space between the two sltting knives ( the height of box)
3. Synchronous moving the upper and lower slotting knives, paper-kicking knives, up and down creasing wheel.
4. Alloy steel materials, hearing treatment, grinding and tooth form slotting knife, width is 5-7mm
5. The alloy steel through heart treatment and grinding the edge iron which is keen and high accuracy.

D)   Die-cutting deprtment

1. The dei-cutting unit depart from the main machine, separate driving ( adopts Kobe servo controller from German) totally solved the problems of changing printing positing due to the die-cutting rushing.
2. Adopt fold type rubber roller, easy to change and convenient operation. Imported rubber roller from Taiwan, the using life is three times of the normal rubber roller.
3. Automatic control left and right moving of rubber roller, the scope is 50mm, steady moving and reliable.
4. The die-cutting phasing adopts servo control, touch screen adjust and control, can store orders.
5. Pneumatic control the gap between the cutter mould roller and the soft roller.
6. It has speed compensation system, automatic adjust the speed of rubber roller, insure the same size of carton and the cutting dies.

E)    Pilling unit

1. Automatic operation and handle one can be optional.
2. The lifting and descending of the machine tool platfrom are driven by the powerful chain.
3. The height of pilling is 1600mm
4. The surface of corrugated belt can be prevent the sliding of the paperboard.
5. The organization of the papre by pneumatic motion, The paper receiving tray will automatically open and catch the paperboard while the paperboards are pilled to the fixed height.

Main technical parameter