Home > Products > Hot work tool steel > skd61 mould steel flat made in china
skd61 mould steel flat made in china
- 5000 Ton / Tons per Month
- shenzhen
- T/T L/C D/P D/A Credit Card PayPal
Product Details
Standard: | AISI, ASTM, BS, DIN, GB, JIS | Grade: | JIS SKD61 steel | Thickness: | max 350mm |
Place of Origin: | Guangdong, China | Brand Name: | YT | Model Number: | SKD61 |
Type: | Steel Plate | Technique: | Other, hot rolled or forged | Surface Treatment: | Other, black or machining |
Application: | Other, tool steel | Special Use: | High-strength Steel Plate | Width: | 20~810mm |
Length: | 1000~5000mm |
Product Description
skd61 mould steel flat made in china
skd61 mould steel flat made in china tool steel stockholders and suppliers, delivering to the whole of the china. YAOTENG Steel are suppliers of skd61 mould steel flat made in china tool steel in round bar, diameters and plate, cut to your requirements. As a reliable hot work steel it is suitable for a wide variety of applications. It combines very good red-hardness with toughness and tools may be water-cooled in service. skd61 mould steel flat made in china may be cold-hobbed in the annealed condition.
We welcome export enquiries for tool steel. Please contact our sales office and consult our shipping policy for further details.
Related Specifications
AISI ASTM A681 DIN 17350 BS EN ISO 4957
|
Form of Supply | YAOTENG Steel are stockholders and suppliers of skd61 mould steel flat made in china tool steel round bar and flat sections which can be sawn cut to your required sizes. skd61 mould steel flat made in china ground steel bar can be supplied, providing a high quality tool steel precision ground tool steel bar to your required tolerances. skd61 mould steel flat made in china tool steel is also available produced as Ground Flat Stock / Gauge Plate, in standard and non standard sizes. |
Applications | Typical applications include die casting dies for aluminium, magnesium and zinc, extrusion dies for aluminium and brass, liners, mandrels, pressure pads, followers, bolsters, die cases, die holders and adaptor rings for copper and brass extrusion. skd61 mould steel flat made in china is used to produce hot stamping and press forge dies, split hot heading dies, gripper dies, hot punching, piercing and trimming tools. Other applications include plastic moulds, shear blades for hot work and hot swaging dies. |
Forging | Preheat slowly to 750°C then increase the temperature more rapidly to 1050-1100 °C. Do not forge below 850°C. It is essential to cool the skd61 mould steel flat made in china slowly after forging, either in a furnace or in vermiculite. |
Annealing | Soak thoroughly at 840-860°C before furnace cooling at a maximum rate of 20°C per hour down to 600°C followed by cooling in air. |
Stress Relieving | When tools made from skd61 mould steel flat made in china are heavily machined or ground , the relief of internal strains is advisable before hardening to minimise the possibility of distortion. Stress relieving should be done after rough machining. To stress relieve, heat the component carefully to 700°C, allow a good soaking period (two hours per 25mm of ruling section). Cool in the furnace or in air. The tools may then be finish machined before hardening. |
Hardening | Preheat to 780-820°C. Soak thoroughly, then increase rapidly to the final hardening temperature of 1000-1030°C. When the skd61 mould steel flat made in china has attained this temperature, soak for approximately thrity minutes. Cool in air. Large sections may be quenched in oil. To reduce scaling or decarburisation, we recommend isothermal molten salt bath treatment. Preheat in salt at 780-820°C then transfer to salt bath standing at 1000-1030°C. Soak and quench into salt standing at 500-550°C. Allow to equalise, withdraw and cool in air. Alternatively, this tool steel may be vacuum hardened or pack hardened. Tools should be tempered as soon as they become hand warm. |
Tempering | Heat uniformly to the required temperature allowing a soaking time of two hours per 25mm of ruling section. Withdraw from the furnace and allow to cool in air. A second tempering is strongly recommended, the skd61 mould steel flat made in china tool being allowed to cool to room temperature between tempers. The usual tempering range is 530-650°C depending on the hardness requirements and the operating temperature of the tool.
|
Welding | In general, we do not advise the welding of tool steel but users sometimes prefer to weld in order to avoid the cost of retooling. It should be remembered that this grade is an air hardening steel and that in welding the area of the weld attains a temperature of about 1000°C. Cracking is likely to occur during cooling unless proper precautions are taken. Popular methods of welding are atomic hydrogen and argon arc. We recommend you contact your welding consumables supplier who should provide you full assistance and information on welding tool steels. Welding Procedure 1) It is desirable to anneal the tool prior to welding but with care welding may be done on hardened and tempered tools. |
Nitriding | skd61 mould steel flat made in china tool steel can be nitrided to give a hard surface case. The steel is then very resistant to wear and erosion. Nitriding also increases resistance to corrosion. Nitriding in ammoniac gas at a temperature of 525°C will give a surface hardness approximately 1000 to 1250HV. Before nitriding the tool should be hardened and tempered at approximately 50°C above the nitriding temperature. It is important to note that with increase in penetration of the nitriding, there is a reduction in resistance to thermal shock and an increase in embrittlement.
|
Heat Treatment | Heat treatment temperatures, including rate of heating, cooling and soaking times will vary due to factors such as the shape and size of each skd61 mould steel flat made in china tool steel component. Other considerations during the heat treatment process include the type of furnace, quenching medium and work piece transfer facilities. Please consult your heat treatment provider for full guidance on heat treatment of tool steels. |
Final Grinding | Select the correct grade of wheel in consultation with the grinding wheel manufacturer. Ensure the grinding wheel is in good condition by means of a suitable dressing tool. Wet grinding is a preferable option using a copious supply of coolant. If dry grinding is resorted to then use a very soft wheel. |
Quality Assured Supply | skd61 mould steel flat made in china tool steel is supplied in accordance with our ISO 9001 : 2008 registration. |
Contact Us
- Dongguan City Yaoteng Special Steel Co., Ltd.
- Contact nameJack Tan
- Phone86-0769-33232622
- AddressDongGuan city, GaoBu town, GaoLong read YiFang Dongguan,Guangdong
- A633 A302 Hot Rolled Carbon Steel Plate
- ASTM A572 Gr. 50 A588 A633 Low Alloy High Strength Steel Sheet
- Wnm360 400 450 500 Abrasion Resistant Steel Plate
- Low Alloy High Strength Steel Plate EN S355m S355ml S355n S355nl
- A203 Low Temperature Pressure Vessel Steel Plate
- ASME SA515 SA516 SA537 High Temperature Pressure Vessel Steel Plate
- 19Mn3 16Mo3 15Mo3 Boiler Steel Plate
- ASTM A537 Cl.1/2/3 Steel Plate for Pressure Vessel
- A515 Gr.60/65/70 Carbon Steel Plate for Boiler and Pressure Vessel
- Q355B Q235B A36 Carbon Steel Plate
- ASTM A537 Cl.2 Boiler Steel Plate
- P265GH Chemical Engineering Boiler and Pressure Vessel Steel Plate
Popular Searches
Recommended Products
- High quality Stainless Steel Pipe Square/Round Steel Pipe High Quality Seamless Steel Pipe
- Good Quality 50mm*50mm 100mm*100mm Hollow Section Rectangular S235 S275 Stainless Steel Square Steel Pipe
- Hollow cross-section black iron square steel pipe ERW technology JIS certification structural application length 6m
- Best-Selling China Manufacture ASTM AISI A36 Carbon Square Steel Pipe
- ASTM/ASME A333GR.6 American Standard Seamless Steel Pipe 508 * 9.53 American Standard Seamless Pipe for Low Temperature Pipelines
- ASME A3335P91 alloy high-pressure boiler tube 114.3 * 8.56 seamless steel pipe
- SA-106Gr C seamless steel pipe 159 * 16 SA-106M standard
- 06Cr18Ni11Ti stainless steel seamless steel pipe 273 * 10 GB/T14976-2012
- Q345D seamless steel pipe 325 * 12 seamless pipe for high-pressure fertilizer equipment GB/T6479-2013
- Seamless steel pipes for 16MnDG low-temperature pipelines GB/T18984-2016 219 * 6
- 09crcusb alloy seamless steel pipe 38 * 3 ND steel
- A633 A302 Hot Rolled Carbon Steel Plate
Find Similar Products By Category
- Minerals & Metallurgy > Steel > Steel Sheets
- Buy on GoldSupplier.com
- How to Buy
- Browse by Catagories
- Browse by Hot Regoins
- Private Sourcing Events
- Sell on GoldSupplier.com
- How to Sell
- Post Products
- Manage Products
- Manage Groups
- About
- About Us
- Link to Us
- Contact Us
- Sitemap
- Please Enter your Email Address
- Please enter the content for your inquiry.
We will find the most reliable suppliers for you according to your description.
Send Now-
Jack Tan
Welcome to my shop! Glad to serve you!Please send your question!
Your message has exceeded the limit.
Your message has exceeded the limit.
-
-
Your inquiry content must be between 20 to 5000 characters.Send Now.
-
Please input the mailbox.
-