Manufacturer of medical x ray film,radiological dry film with CE,KND-A/F,used on fuji and agfa printers

Specifications

Konida medical dry film:
High quality and speed
Environmrntal friendly
Stable and clear image
Compatible with fuji and agfa

Konida Medical Dry Film (KND-A/F)

Konida Medical Dry Film (KND-A/F) has image layer and protect layer on different side of bluish polyester bases, and there are no sensitive silver halide in both layer. The film is fit for thermal printer to print digital image which is processed and stored in the computer, to attain the enhanced x-ray image quality. Compared to traditional silver halide processing, the procedure is more convenient and the speed of processing is faster. Meanwhile, it reaches to the goal of environment protection because the whole procedure is free of the Chemicals.

Features

Low fog

High sharpness

High max density

Bright tone

Compatible with AGFA,Fuji,Sony,Codonice thermal printers

Safe light

It can be processed under room light condition since the film is not sensitive to light.

Processing

The product can be directly printed with Fuji,Lucky or AGFA thermal printers to get ideal image. The print conditions should be tested when using in other printer types.

Storage

Please store the film in cool and dry place without dust. Keep away from direct sunlight, acid or alkaline gas. Details as follows

1. Temperature and humidity,temperature 10°C~23°C, humidity 30%~65%RH, keep away from the heat resource.
2. Gas,There are no hydrogen sulfide, ammonia, sulfur dioxide, formaldehyde, and any other alkaline gas, etc.

3. Pile,Please keep film upright to avoid the bad influence caused by pressure. 

Period of validity

The period of validity is 24 months under above conditions.

Conditions of usage

The best condition of usage as following
Temperature 18°C~24°C, humidity 50%~65%RH.

Notes

1. Store the film under the conditions specified above.

2. Take the film out of the cool place and place the film with the package in the place where the film will be used for at least 4 hours, to avoid the steam concentrate on the film and damage the film.

3. It should be careful to handle the film, don't crash, fold, distort and rub the film, don't touch the film with wet hand.

4. Dealing with the waste film should obey the local law and regulations.

 

Package and Size

 

Size		Sheets/box	Boxes/case
8in×10in	20cm×25cm	100	5
10in×12in	25cm×30cm	100	5
10in×14in	26cm×35cm	100	5
11in×14in	28cm×35cm	100	5
14in×17in	35cm×43cm	100	5

 

Reference

Normal Packing

Neutral Packing

Factory

Attending exhibiton

 

Transport

 

Welcome to contact us for any question.