3ONEDATA 2 Channels Fiber Optic Video Converter(SWV60200)
Specifications
1)compatible with NTSC, PAL, and SECAM CCTV camera2)Support any high-resolution video signal
3)CE,FCC,RoHS
2 Channels Fiber Optic Video Converter(SWV60200)
Introduction
3onedata fiber-optic video transceivers SWV60200 series can simultaneously transmit 2 channels of 8-bit digitally encoded broadcast quality video/return or bidirectional data/unidirectional or bidirectional audio/Ethernet/Telephone/Dry contact over one multimode or single-mode optical fiber. These multiplexers are typically used in applications where the cameras have P/T/Z capabilities. Plug and Play design ensures the ease of installation and operation. Electronic and optical adjustments are never required. LED indicators are provided for instantly monitoring system status. Devices are available for either standalone or rack-mount installation, which is suitable for different working environment.
| Technical Specification | |
| Video channels | 2 channels |
| Video bandwidth | 8 MHz |
| Automatic compatible video system | PAL, NTSC, SECAM |
| Video input/output impedance | 75 Ω(unbalance) |
| Video signal-to-noise ratio | ≥67dB |
| Differential gain | (10%-90%APL) DG <1% ( typical value) |
| Differential phase | (10%-90%APL) DP <0.7° ( typical value) |
| Video connector | BNC |
| Fiber-optic Specification |
|
| F/O connector | FC/ST/SC |
| TX | Power:-15 ~ -8dBm Sensitivity :≤-35dBm |
| RX | Power:-15 ~ -8dBm Sensitivity :≤-35dBm |
| Transmission Distance | 20KM (single mode) |
| Operating Wavelength | TX1310/RX1550nm (Transmitter); TX1550/RX1310nm (Receiver) |
Specification of custom-made options
1. Data
Connector: Terminal Blocks
Encoded type : RS485 / RS422 / RS232 / Manchester
Data rate : 0 - 400Kbps
BER: ≤10-9
2. Audio
Connector: Terminal Blocks
Audio input / output impedance :600Ω(Balance/ unbalance)
Audio input / output voltage :2Vp-p ( typical value)
Audio input / output level :0dBm ( typical value)
Video bandwidth:10HZ~12KHZ
Audio digital encoded bandwidth :24bit
Audio signal-to-noise ratio: S/N≥95dB (weighted)
3. Telephone
Connector: RJ11
Bandwidth :8KHZ
Features:Support call-showing function ;support H-F
Operating mode : Point to point hotline mode / FXS-FXO
4. Ethernet
Connector: RJ45
Support mode : Half duplex or Full duplex
Standards:IEEE802.3
Data rate : 10M / 100Mbps
Bandwidth: 25M
Characteristic
Dimensions: 19.2(L)×17.3(W)×2.8(H) cm
Operating Voltage: DC5V (we will offer external power supply from AC96-240V to DC5V for each unit )
Operating Temperature: -10°C to +65°C
Storing Temperature: -45°C to +85°C
Humidity: 0 to 95% non-condensing
MTBF: ≥ 105 hours
Send Inquiry to This Supplier
You May Also Like
-
CCTV Monitoring SystemNegotiableMOQ: 2300 Sets
-
WIFI Camera Wireless Indoor Camera 2 Way Audio Baby Care Monitor Tuya Version CCTV Camera 2 Wifi Smart HomeNegotiableMOQ: 1
-
2013 New Arrival PIR-100D Wireless Out-door PIR Motion Sensor DetectorUS$ 1.5 - 5.5MOQ: 1 Unit
-
Hot USB Rechargeable Security Guard Checkpoint SystemUS$ 110 - 140MOQ: 1 Set
-
Fiber Optic Video Transmitter and Receiver for CCTVUS$ 69 - 245MOQ: 1 Piece
-
BNC PIN CONNECTOR Gold Plated for CCTV CameraUS$ 0.1 - 10MOQ: 1 Piece
-
16 CH NVRUS$ 78.7 - 78.7MOQ: 1 Set
-
Home Automation Network Wirless IP CameraUS$ 180 - 230MOQ: 1 Piece
-
Multi-Channel Audio/Video Encoder For Surveillance System SC8916US$ 0.2 - 1MOQ: 1 Pack
-
4G Solar Powered Outdoor Security CCTV Camera With SIM Card Auto Tracking Remote Monitoring and 64GB StorageUS$ 30 - 100MOQ: 10 Pieces