3ONEDATA 2-Channel Audio Video Fiber Transmitter Receiver(SWV60200)

Specifications

1)compatible with NTSC, PAL, and SECAM CCTV camera
2)Support any high-resolution video signal
3)CE,FCC,RoHS

2-Channel Audio Video Fiber Transmitter Receiver(SWV60200)  

 

Introduction 

 3onedata fiber-optic video transmitters SWV60200 series can simultaneously transmit 2 channels of 8-bit digitally encoded broadcast quality video/return or bidirectional data/unidirectional or bidirectional audio/Ethernet/Telephone/Dry contact over one multimode or single-mode optical fiber. These multiplexers are typically used in applications where the cameras have P/T/Z capabilities. Plug and Play design ensures the ease of installation and operation. Electronic and optical adjustments are never required. LED indicators are provided for instantly monitoring system status. Devices are available for either standalone or rack-mount installation, which is suitable for different working environment.

 

Technical Specification
Video channels	2 channels
Video bandwidth	8 MHz
Automatic compatible video system	PAL, NTSC, SECAM
Video input/output impedance	75 Ω(unbalance)
Video signal-to-noise ratio	≥67dB
Differential gain	(10%-90%APL) DG <1% ( typical value)
Differential phase	(10%-90%APL) DP <0.7° ( typical value)
Video connector	BNC
Fiber-optic Specification
F/O connector	FC/ST/SC
TX	Power:-15 ~ -8dBm   Sensitivity :≤-35dBm
RX	Power:-15 ~ -8dBm   Sensitivity :≤-35dBm
Transmission Distance	20KM (single mode)
Operating Wavelength	TX1310/RX1550nm (Transmitter); TX1550/RX1310nm (Receiver)

 

Specification of custom-made options

1. Data

Connector: Terminal Blocks

Encoded type : RS485 / RS422 / RS232 / Manchester

Data rate : 0 - 400Kbps

BER:  ≤10^-9

2. Audio

Connector: Terminal Blocks

Audio input / output impedance :600Ω(Balance/ unbalance)

Audio input / output voltage :2Vp-p ( typical value)

Audio input / output level :0dBm ( typical value)

Video bandwidth:10HZ~12KHZ

Audio digital encoded bandwidth :24bit

Audio signal-to-noise ratio: S/N≥95dB  (weighted)

3. Telephone

Connector: RJ11

Bandwidth :8KHZ

Features:Support call-showing function ;support H-F

Operating mode : Point to point hotline mode / FXS-FXO

4. Ethernet

Connector: RJ45

Support mode : Half duplex or Full duplex

Standards:IEEE802.3

Data rate : 10M / 100Mbps

Bandwidth: 25M

Characteristic

Dimensions: 19.2(L)×17.3(W)×2.8(H) cm

Operating Voltage: DC5V (we will offer external power supply from AC96-240V to DC5V for each unit )

Operating Temperature: -10°C to +65°C

Storing Temperature: -45°C to +85°C

Humidity: 0 to 95% non-condensing

MTBF: ≥ 10⁵ hours