S78 anti-vibration machine mounts

Specifications

S78 anti-vibration machine mounts
1,Height(Adjustable):5-12mm
2,Diametre:40-315mm
3,Bolt:M5-M30
4,ISO9001&CE

S78 anti-vibration machine mounts specifications:

1.It isolators the vibration and shock of the machine from the floor.It can also reduce the

influences from other machine.

 

2.Machine are stationary on the floor without anchors.It keeps the machine in its

position.Therefore the installation cost and time can be greatly saved.

3.The machien tools level can be large range adjusted,easily and fast.

4.Elastomers is make of Nitvile rubber compound,It can resist oil and refrigerant.

 

Application:

Metalcutting machines.Metalforminh machines.Rubber and plastic machines,Printing

machines,Wire machines,Packing machines,Foodprocess machines.Generator and heavy-duty

machines.

 

How to Install

Place the mounts under the anchor hole of the machine.Insert the bolt into the screw hole

of mount.And screw it in until it reacher the bearing plate.Then adjust the level of

machine.Finally tighten the nuts.

 

 

Dear friends,

         

       Many thanks for your attention on our S78 anti-vibration machine mounts  .

       If there is anything that I can help you,please leave me the message on the end of this page ,or you can chat with me directly ,because i will be mostly on line ,and I will do my utmost to help you.

 

         Wish you every success.

Best regards,

Jack Wu