Specifications
360W LED AC/DC switch led Power supplyInput voltage: 170-250VAC
Output voltage: 5V, 12V ,24V
2 years Warranty
CE & RoHS
360W switch led Power supply, OEM service availiable.
Input voltage:170-250VAC
Output voltage:5V, 12V ,24V
Output current: 70A, 30A, 15A
Output power:360W
Features 1,Non-waterprooof design for indoor use only
2,Protections: Short circuit / Overload/Over temperature
3,Products through CE, RoHS Certification
Specification:
| Model | S-360-5 | S-360-12 | S-360-24 |
| DC output voltage | 5V | 12V | 24V |
| Output voltage error(Note2) | ±2% | ±1% | ±1% |
| Rated output current | 70A | 30 | 15 |
| Output current rage | 0-70A | 0-30A | 0-15A |
| Wave and noise(Note 3) | 100mVp-p | 125mVp-p | 150mVp-p |
| Inlet stability(Note 4) | ±0.5% | ±0.5% | ±0.5% |
| Load stablity (Note 5) | ±1% | ±0.5% | ±0.5% |
| DC output power | 360W | 365W | 370W |
| Efficiency | 76% | 80% | 83% |
| Adjustable range for DC voltage | 10% | 10% | 10% |
| AC input voltage range | 85-132VAC /176~264VAC selected by swich 47~63Hz;248~370VDC | ||
| Input current | 2A/115V 1A/230A | ||
| AC INnrush current | Cold-start current30A/115V 60A/230V | ||
| Leakage current | <1mA/240VAC | ||
| Overload proctection | 105%-150%Type:Foldback:current limiting reset:auto recovery | ||
| Over-voltage protection | 115%-135 | ||
| High-temperature protection | Yes | ||
| Temperature coefficient | ±0.03%/°C(0-50°C) | ||
| Setup rise hold up time | 1s,30ms,15ms | ||
| Vibration | 10-500Hz,2G 10min,/1cycle,Period for60min,Each axes | ||
| Withstand voltage | Input and output internal: 1.5KVAC,Input and enclosure : 1.5KVAC,Output and enclosure: 0.5KVAC | ||
| Isolation resistance | Input and output internal:Input and enclosure,Output and enclosure: 500VDC/100MΩ | ||
| Working temperature and humidity | -10°C~+60°C(Refer to output derating curve),20%~90%RH | ||
| Store temperature and humidity | -20°C~+85°C.10%~95%RH | ||
| Overall dimension | 199×98×38mm | ||
| Weight | 0.65Kgs | ||
| Safety standards | UL1012 TUV EN6050(IEC950,UL1950)Approved | ||
| EMC standards | CISPR22(EN55022),IEC801-2,3,4,IEC555-2 Verification | ||
| Note | |||
| 1.The testing condition for the paramenter above is :230VAC input,rated load,25°C70% RH.Humidity. | |||
| 2.Error.include the setting error,line stability and load stability.(Note:5). | |||
| 3.Wave test:adopting "A12"double wire for 20MHz,and 0.1UF&47UF capacitor short-circuit for interrupting. | |||
| 4.Inlet voltage stability test:when is over load,the lowest voltage of inlet is up to the highest voltage. | |||
| 5.Load stability test:the load is from 0% to 100%. | |||
Send Inquiry to This Supplier
You May Also Like
-
ACSW Series Programmable AC Power SourceNegotiableMOQ: 1 Set
-
Original 6SL3120-1TE32-0A4 Siemens S120 Single-shaft Drive Module Output 3AC 200A Brand NewNegotiableMOQ: 1 Piece
-
Emergency Mobile Power Supply Portable Energy Storage Power SupplyUS$ 150 - 350MOQ: 2 Pieces
-
Recycle Used Electronic Scrap Hong KongNegotiableMOQ: 10000 Pieces
-
CX-9001 1KVA Knob Type Variable AC Power Supply Unit of Single Phase Input and Single Phase OutputNegotiableMOQ: 1 Piece
-
0-300v ,0-500v, Single dc Regulated Power SupplyUS$ 100 - 800MOQ: 1 Piece
-
OEM Industrial Parts-MIM Powder Metallurgy ProductsNegotiableMOQ: 1 Piece
-
Universal Travel Adapter&power Power Converter Adapter Power SupplyUS$ 100 - 5,000MOQ: 10 Sets
-
Cheap 12V 2A Led Lights Power Supply ManufacturerUS$ 0.78 - 1.5MOQ: 1000 Poles
-
(DC Power Supply) QJ12003E 100% Original&New!!NegotiableMOQ: 1 Set