Contact Platform Support
Help Center4 Channels DMX LED Dimmer, LED Strip Controller, 4 Channels DMX Decoder
Related Products
-
Led Decoder /led Digital Dmx DecoderUS$ 28 - 35MOQ: 20 Pieces -
512 Channels DMX Decoder, Dmx Led DimmerUS$ 28 - 32MOQ: 20 Pieces
-
DMX 512 Channel PWM Led DecoderUS$ 28 - 32MOQ: 20 Pieces
-
4 ch DMX Decoder;4 Channels Rgbw DMX512 DecoderUS$ 12 - 32MOQ: 200 Pieces
-
Led Drive IC Dmx DecoderUS$ 28 - 32MOQ: 20 Pieces
Specifications
4 Channels DMX LED Dimmer,Grey Scale: 256 levels,
Output Current : 350 mA /Channel*4,
Signal input : DMX512
4 Channels DMX LED Dimmer ,
Introduction:
YM-HD4P is a Constant current DMX512 Decoder and driver for RGBW high power led lights. By advantage of advanced coding technology, the unit is compatible with international DMX512/1990 standards, which decodes the international popular digital control signals into a PWM signal to drive RGBW LED lights. Each channel can be controlled with 256 level gray-scales.
Specification and Parameter:
Grey Scale: 256 levels
Input voltage: DC9V-36V
Output Current : 350 mA /Channel*4(all positive)
Output Power: 28W max
Signal input : DMX512/1990
Signal Output : constant current PWM*4Channels
Driving LED number: 5-7pcs /channel, (1Watt high power led lamp)
Consumption: <1W
PCB Size: 53*30mm
Features:
1. Perfectly compatible with international DMX512/1990 standards.
2. Differential signal transmission, support 3 mode of data transmission:
3. Display effects:
If connected to DMX512 led controller or DMX512 console, the effects will follow the DMX512 led controller or DMX512 console, and change color per their commands.
If not connected to DMX512 led controller or DMX512 console, the effects will for pre-load program in side of the decoder.
4. Connection in Parallel
Each decoder is connected on DMX512 signal bus in parallel. It is recommended that signal amplifiers should be used for every 32 pcs of decoders in case of signal drop(Attenuation).
5.Strong anti-interference ability, anti-static and prevent lightening design.
Application:
LED project light, LED Wall washer, LED ground light, LED Ceiling light, Channel light, LED Guardrail tube, full color RGB lights and LED point source lights.
Input & Output:
POUT PIN: PIN is program input, POUT is program output.
D+, D-, GND: input signal of DMX512,
Power+ and Power-: Power supply, Power+ is positive and Power-(GND) is ground( negative).
V+, R, G, B,W: RGBW Output, V+ is common anode of output.
Conjunction:
1 Pin: V+
2 Pin: R Red LED drive output
3 Pin: G Green LED drive output
4 Pin: B Blue LED drive output
5 Pin: W White LED drive output
Send Inquiry to This Supplier
You May Also Like
-
UL Listed LED Power Supply 100-277V AC Input 48V DC Output for Commercial UseUS$ 5 - 7MOQ: 50 Pieces
-
LED Power SupplyNegotiableMOQ: 2600 Pieces
-
UL CE UKCA KC FCC PSE LED Power Supply Driver 12V/24VUS$ 8.33 - 12.33MOQ: 200 Pieces
-
UL CE CUL Thin Power Supply Adapter Transformer Driver With Bluetooth and TuyaNegotiableMOQ: 200 Pieces
-
Solderless Wire to LED Strip Joint Quick Splice Connector For LED LightingNegotiableMOQ: 100 Pieces
-
Sinolite 2015 YYseries Electronic Neon Transformer for SaleNegotiableMOQ: 10 Units
-
High Quality 12 Volts 5 Amp 60 Watt Waterproof Led Power Source, Led Strip Power Supply TransformerUS$ 5.9 - 15MOQ: 1 Piece
-
Waterproof Electronic Led Drive for Outdoor Lighting Energy Saving Led Transformer ac dc Power SupplyUS$ 1 - 3MOQ: 50 Pieces
-
24 Volt LED Transformer 6A With 2 DC PlugUS$ 30 - 36MOQ: 1 Piece
-
Indoor 9W 350mA Constant Current LED Power Supply(SC-Y3509)US$ 6.9 - 9.9MOQ: 100 Pieces
