automatic garage door motor

Specifications

automatic garage door motor without chain and guiding rail,more conventinet to transport and install

 Features:

 

1)This kind of automatic garage door motor is our patent product,solve the problem of installation if there is a crossbeam inside garage.

2)This automatic garage door motor doesnt need the rack, guide screw and slide bearing as a traditional opener does, it drives the Spring pole directly by motor. It takes small volume, convenient to transport, and save the charge of transportation.

3)Time---lapse light, storage power, infrared sensor, alarm system programmable....

4) Rebound meeting with obstacle in its down moving and stops when meeting obstacle in its up moving

5) Storage power, infrared sensor, alarm system programmable....

6) Many types of transmitters for choosing

7) The users can open and close the door by remote control operation, electric operation and manual operation

8) we could control this automatic garage door motor normally in the out side even in a bad weather condition

9) With Wire rope tensioning screw accessory, more theftproof against being pried.

10) A big Ring Transformer inside the controller to make sure it could perfectly work in a unstable voltage.

11) Use DC motor, with the safe voltage DC24

 

Technical parameter

Name	Specifications
Power supply	110/220/240v±10%  50/60Hz
Power dissipated in off state	≤5W
Max elevating power	600N	800N	1000N
Motor noise	55dB
Motor power	90W	120W	150W
Working speed	0.12m/s~0.14m/s
Remote control distance	≤50m
Working temperature	-20~60
Max elevating high	≤2.5m	≤3.5m	≤4.2m
Optional garage door specification	≤8	≤12	≤15