industrial timing belt / rubber timing belt/ China timing belt

Specifications

industrial timing belt / rubber timing belt/ China timing belt :excellent quality in reasonable price.
Auto timing belt,

industrial timing belt / rubber timing belt/ China timing belt

1 Automotive timing belt, T type belt, arc tooth belt, double sides belt are supplied.

2 We have R&D center that we can custom-produce according to your require or the given sample.

3 The following types are available.

The details of sizes and types

T type

Type	Pitch Pb(mm)	Tooth height ht(mm)	Belt thickness hs(mm)	Angle β°
MXL	2.032	0.51	1.14	40
XL	5.080	1.27	2.30	50
L	9.525	1.91	3.60	40
H	12.70	2.29	4.30	40
XH	22.225	6.35	11.20	40
T2.5	2.5	0.7	1.30	40
T5	5	1.20	2.20	40
T10	10	2.50	4.50	40
T20	20	5.00	8.00	40

 

 

 

 

 

 

 

 

 

 

 

 

 

arc tooth belt

Gear code	Type	Pitch Pb(mm)	Tooth height Ht(mm)	Belt thickness hs(mm)
HTD	3M	3	1.17	2.4
	5M	5	2.06	3.8
	8M	8	3.36	6.00
STPD/STS	S5M	5	1.91	3.4
	S8M	8	3.05	5.3
RRP	8M	8	3.2	5.5

Industrial synchronous belt features:

With synchronous belt drive is the use of tooth and tooth meshing with the impetus to pass a new type of transmission mode. With accurate synchronous transmission function, do not need lubrication and no slip, no pollution, lessnoise, transmission efficiency of 0.98, the speed ratio range up to 1:10,allowing wire speed up to 50 m / s, the transmission rate from several hundred watts to the hundreds of kilowatts, suitable for multi-axis drive.

Neoprene synchronous belt widely used in the textile, automobile, chemicalfiber, tobacco, paper, printing, chemical mechanical equipment; In recentyears, mining and metallurgy, iron and steel machinery, medical equipmentdemand is growing.

Double-tooth and tooth pitch synchronous belt of single tooth synchronous beltand the same 

 

T-synchronousbelt drive system in exactly the same, it can improve the efficiency of theengine so that the engine can be smooth and quiet operation, more capable.

When attention to the purchase of industrial products synchronous belt surface clean, no twisted belt, filled with teeth.

Industrial synchronous belt use Note:
synchronous  belt products need no twists and turns to avoid injury skeleton material impact belt strength.
Scratch  synchronous belt products need no belt, belt early so as to avoiddamage.
synchronous  belt products to avoid chemicals (especially the strong oxidizingacid, such as concentrated sulfuric acid, etc.) contact.

 

Self-introduction:

 

Southeast Co., is the member of China Rubber Industry Association that was founded in1988.

We have the modern manufacture line with an annual output of  Eighty Million Classical V-belts A meters,Nine Million Square meters conveyor belts, Five Million pieces of Automotive V-belts.

 

My company has founded the high-tech research and development center that is cooperate with university. Therefore, we can design the produces according to client's requirements.

 

We also manufacture special belt when the sample was given.

 

Southeast Co. were approved as AAA Quality and Credit enterprise.

Southeast Rubber Belt Co.,Ltd. wish you health and prosperity.