High Frequency Switching power power supply 1100W DC hot swap rectifier

Specifications

1.switch power supply
2.full range of input voltage
3.one-year warranty
4.low cost
5.fast delivery

1100W DC output High Frequency Switching power Charger & rectifier &power supply

 

Features:

Patent technology, soft switch during the whole switching process.

High efficiency :  ≥95%

Small size, light weight

Natural cooling with heat sink, low failure rate

Rank the top 2 behind Emerson in China DC market.

CE, RoHS,  ISO9001 approval

Compatible detecting module is available, including monitoring system, insulation status detector, battery detector, Complex information detector etc.

Adopt protocal CDT or MODBUS, with interface RS232 and RS485 betwwen the detecting modules.

The software and program on the module could be customized according to your requirements.

 

Details  :

 

Parameter			380V AC input, 110V DC output models
			TH110D10NZ	TH110D20NZ	TH110D10ZZ-3	TH110D20ZZ-3	TH110D40ZZ-3
Input	Input voltage		380V AC±15%, 3 phase
	AC input frequency		45Hz ~ 65Hz
	Efficiency		≥95%
	Power factor		≥0.93
Output	Output voltage		88-150V		95-150V	95-150V
	Output current		1-10A	2-20A	1-10A	2-20A	4-40A	3-30A	4-40A
	power  (W)		1500	3000	1500	3000	6000	9000	12000
	Start delay		3 ~ 8s
	Current stabalization		≤ ± 0.5%
	Ripple		≤ 0.2%
	Voltage stabalization		≤ ± 0.5%
	Inter-rectifier Current sharing imbalance		≤ ± 3%
CoOLING METHOD			forced cooling with fan		natural cooling with radiator
Accoustic noise			<50dB
Protection	Multi-protection		Multi-protection including input over or under-voltage, output over or under-voltage, over-temperature, reverse connection, phase failure, and short circuit protection. The rectifier will shut down without output, and will return to normal operating after fault is cleared.
	Automatic current limiting		The output current will keep fixed without increase after it exceed the set point.
Environment	Operation ambient temperature		-20°C ~ 50°C
	Storage temperature		-40°C~ 60°C
	Relative humidity		≤ 90%
	Air pressure		70 ~ 106kPa
Safety	Insulation resistance		I/O to chassis and input to output >10MΩ (Test voltage: 500Vdc)
	Dielectric strength		Impose 2000Vdc between I/O and the chassis aftering shorting the input and output for one minutes. No breakdown or flashover
Mechanical	Size (L × W × H) mm		195×91×303	195×91×303	218×116×260	263×139×325	355×154×400	303×136×410	303×136×410
	Weight		5kg	5kg	5.2kg	9kg	16kg	19kg	19kg

 

Our Factory can customize any input and output switching mode power supply (high frequency power supply )according to your requests.

For example:

 

110VDC 10A, 110VDC 20A,110VDC 30A, 110VDC40A

220VDC 20A, 220VDC 30A,220VDC 40A

 

More choices for you :

 

 

More information about products, pls send email to us.

We are always ready to supply our best service for you .