SBS bitumen waterproof membrane with pet surface for construction materials

This product is made in the following way: base materials are firstly dipped into asphalt or thermoplastic elastomer(e.g.SBS), thermoplastic(e.g.APP or APAO) and modified asphalt; then both surface are coated with elastomer or plastic asphalt; fine sands and mineral grain (pieces) or polyethylene membranes are spread or covered on its upper surface; fine sands or polyethylene membranes are spread or covered on its lower surface.

It has a good waterproof performance and aging-resistant capacity. It does not drip in high temperature, nor does break in low temperature. It is easy to use in construction, with no pollution to environment but a long service life.

Usage:

It is widely used in waterproof and damp-proof works of roof,basements,bathrooms and pools of industrial and civil architectures,waterproof,damp-proof, airproof, and leakage-proof works of bridges, parking lots, swimming pools, tunnels and reservoirs and maintenance works of asphalt roofs.

Construction Method:

Make sure the roof deck smooth, clean and dry. Water content shall be less than 9%,then apply the surface of roof deck homogeneously with a kind titumen paint, till dry to start application..

There are two methods in application.

One way is by heating and melting method. Heat the polyethylene film of the membrane and roof deck surface by heating and melting method to be nearly melted(not flowing), then install the membrane fully bonded to the roof deck with overlaps of 5-10cm.

The other way is by heating and melting method. Pour the cold adhesive homogeneously on the roof deck, then roll the membrane to install it to be fully sticked to roof deck.

By heating and melting method and by cold adhesive can be used in alternation in application as requested.

After application, a full serious inspection is required to sure no air bubble, no fold, no falling away etc. to guarantee the waterproof life.

SBS Technical data Confirming to GB18243-2008

Production line

1.sample: the sample is free ,you only should pay for the freight.

2.If you order to us ,we must promise the quality ,if some quality problem happened,

3.We will dispatch our Quality and Problems Appraisers to make a confirmation 

4. Have a negotiation of the compensation and sign agreements 

5.Our After-Sales Department will perform the duties as the agreements. 

Weifang Xuxin Waterproof Materials Co.,Ltd. Is one specialized supplier on waterproof materials. The company is located in Taitou Town, Shouguang City, One very famous waterproof materials town in China.

The company mainly supply SBS/APP modified bitumen waterproof membrane,Self-adhesive bitumen membrane/Tape,Polythene and polypropylene polymer compound waterproof membrane,PVC waterproof membrane,EPDM coiled rubber waterproof membrane,Polyester/Compound felt for SBS/APP membrane,PP Non-woven fabric,Colorful polyurethane waterproof coating and some other relevant waterproofing products.

Poducts got the approval of ISO9001 certification, And ISO14001 certification. And some products can meet American ASTM and CE international standards.

Being environmentally friendly, our products are exported to Southest Asia, The Middle East , West Europe,Africa, and Australia. We have won a good reputation among customers around the world. Furthermore, We are continuously developing new products to meet different market demands.

Not for the best, but for the better, work and service for you esteemed customers requirmrnts.Hope to contribute to waterproofing industry for future brilliance with you together.