5.8Ghz 32CH 2000mw transmitter SKY-N2000 250 fpv quadcopter

5.8Ghz 32CH 2000mw transmitter SKY-N2000 250 fpv quadcopter

Welcome to enjoy the Skysighthobby wireless AV FPV Transmitter. Skysight products have forged a reputation for qualityand reliability and are tested and developed by FPV pilots for FPV pilots.

The SKY-N2000 FPV Transmitter packs a whopping 2000mW of ultra clean 5.8GHz power! A must for those looking for longer range and locked in video. The N2000 can transmit a full range of 32 channels and comes with a clean pre-wired harness, it’s perfect for any long range aircraft!

The N2000 boasts an impressive new feature, the transmitting band and channel can be changed remotely by the user with a 3 position switch on their radio. This means you can quickly change to a clear band and frequency should you encounter interference on your existing channel.

Features of FPV Transmitter :

• Dual-color 128x 64 OLED display showing channel number.
•  2 ways signal inputs, you can switch video signal source using transmitter during flight.
•  Low power alert function. support 2-6S, low voltage alert supporting voltage selection.
•  Power source voltage indicating.
• TX working current indicating
• TX working temperature  indicating
• TX PA detection power indicating

Specifications of FPV Transmitter :

• FPV 5.8G 32CH 2000mW A/V Transmitter Module (TX) W/ OLED Display | (SMA, jack)
• video format supported: NTSC/PAL
• Antenna connector: SMA  jack (module side)   
• Power input: 6.5-28V (3S Lipo suggested)
• Transmitting current: 600mA @12V

*Note: TX antenna must be installed properly before it is switched on, power on without install antenna, or a improper antenna was used may easily burn the TX, and such damage is not covered by warranty

Detail Specification:

Packing Accessories List

•  1 x 5.8G 2000mW FPV transmitter
•  1 x Stock dipole whip antenna
•  1 x Power in harness 
•     1 x Power out Video out Audio out harness 

 Product Detail:

Product Show: