3/4" Nozzles Plastic Chemical Liquid Fuel Injector Dispensing Nozzle

Specifications

Due to the highly sensitive nature of AdBlue/DEF,AILE developed Stainless Steel Nozzle in an effort to avert contamination.

Before beginning installation of the product, please carefully read all warnings. 

• Follow all manufacturer’s instructions.
• Use safety cones to mark-off work area.
• Shut off power to the dispenser and close the emergency shut-off valves under the dispenser.
Relieve system pressure before servicing or replacing dispensing products, such as nozzles, swivels, or breakaways.
• If nozzle replacement, remove old nozzle with a wrench. Carefully drain fuel from hose & nozzle into approved container.

 

REMOVAL OF THE HOLD-OPEN LATCH ON
THE NOZZLE
• If local codes require that the nozzle cannot have a hold-open latch, please follow these instructions to remove the hold-open latch.
• Verify dispenser is turned off.
• Place the nozzle on a flat surface. Hold lever in open position and insert a flat-bladed screw driver along side of the hold-open rack. Pry the rack upward and off the rivets.
CAUTION: Protect your face and other exposed body parts;wear safety glasses.
• Make sure broken rivets are removed from the guard. Throw away old parts.
• Do not alter the trigger or rack mechanism from its original configuration. The nozzle shut-off mechanism could be impaired as a result.

Only use authorized AILE repair kits.