MG series: latex rubber water glue and adhesive primer

Specifications

is made from natural rubber latex and PMMA.
1. as primer for adhesive
2. as raw material for latex glue
3. water glue

 

Here are additional strengths of latex rubber MG-series:

Aside of enhancement of the adhesive bonding operation workability by reducing coagulation, Followings are additional strengths;

 

1. It is an ideal intermediary between rubber materials.

One of natural rubber’s significant characteristics is autohesion;

It bonds with another natural rubber material without force.

This makes MG-series as an ideal intermediary between rubber objects.

2. It has more flexibility than synthetic rubber.

Natural rubber has stronger tension strength and longer extension allowances than synthetic rubber; these traits put MG-series to gain advantages over synthetic rubber when flexibility is required for adhesives.

 

3. It is eco-friendly.

MG-series is made from natural plants that do not require artificial processing operation as synthetic materials do; therefore, this dramatically reduces CO₂ emission from production of adhesives and primers.

 

4. It does not contain hazardous substances.

Unlike chemically processed raw materials, it is harmless to living creatures and environments.

None of materials relevant to Restriction of Hazardous Substances are in use.

 

5. It is safe.

As it is a water-based non-chemical material that;

 • It is not flammable,

 • Operators will not suffer from organic solvent poisoning while using it,

 • Explosion protection facility does not need to be built for processing the material.

 

6. It dramatically reduces maintenance duration.

Typically, running natural rubber made adhesives and primers on coating machine require cleaning process every two to three hours to get rid of coagulation. However, applying MG-series dramatically reduces the cleaning duration; in fact, using this allows the coating machine to be running 24hours consecutively.

 

7. It is durable.

MG-series’ degree of viscosity is stability when it is stored accordingly to our instruction. It will not get spoiled when you purchase this in bulk. And this will only require nominal viscosity control effort for usage each time.

 Ex. Comparison of degree of viscosities after three months of storage.

 Our competitors’: 2,000 mPa·s

 MG-series: 300 mPa·s

8. It saves time.

As it does not contain organic solvent, cleaning and aging process may be eliminated.

 

9. It may be applied on materials that are easily dissolved in organic solvents.

For example, material made of styrofoam dissolves well in an organic solvent that chemically processed adhesives and/or primers may not be used on it. However, MG-series may be used on stryofoam