PP corrugated hose

PP corrugated hose

1. Constitute: Telescopic pipe is extruded by hard bones and muscles frame and  environmental protection material (polyether ester) hard bar.

2. Key size:

    Telescopic part of the external wave 2 ~ 4 mm, pitch of wave from 3 to 6 mm; Internal wave 0.5 ~ 1 mm.

    Recommended length is 400 mm, 500 mm, 600 mm, 800 mm, 1000 mm, 1200 mm, 1400 mm, 1600 mm , 1800 mm, 2000 mm and 2200 mm, the length tolerance is L+50 0.

3. Characteristics: Telescopic pipe extrusion skeleton is uniform and good toughness, the surface outside pipe is bright, clean and level off, without a scratch, crack, bubble, uneven, Ge nest, lack of glue, delaminating, double skin, NingJin, efflorescence, lack of material defects etc. affect the appearance and use of performance.

4. Applications: Widely applied in cable casing,construction drainage,agricultual drainage,irrigation,chemical industry,medicine and ventilation ducts etc.

5. Mark: OEM products are welcome.

Our factory is a professional plastic, rubber, silicone extrusion manufacturer, we can do various customized profile, tube, seal strip, auto seals and other extrusion product.

HEBEI RUIDE GROUP SANXING RUBBER & PLASTIC CO., LTD 

Main Production Equipments:

(1) 7 sets Rubber micro wave hot air vulcanization production line

(2) 4 sets Plastic extruding production line

(3) 6 sets Injection molding machine

(4) 2 sets Rubber open mill

(5) 2 sets Rubber mixing mill

(6) 1 set Combination Lathe

(7) 30 sets Flat-panel vulcanizer

The main testing equipment:

(1) 1 set Universal electronic tensile testing machine

(2) 1 set Thermal aging test chamber

(3) 1 set Low-temperature box

(4) 1 set Analytical balance

(5) 2 sets Hardness tester

(6) 1 set Automatic projector

(7) 1 set Flash point tester

(8) 1 set Mooney viscosity meter

(9) 1 set No rotor sulfate acid

WHY US?

1. Full technical support from material mixing to final product delivery.

2. On-time delivery with no compromise on quality.

3. High-quality product making with advanced equipment and techniques.

4. Above 10 years' experiences in rubber parts manufacturing.