Split water source heat pump (water to air heat pump2kw-22kw)

Specifications

Split water source heat pump (water to air heat pump)
including outdoor units and exposed or concealed fan coil indoor units

Split water source heat pump (water to air heat pump) 2kw-22kw

Three kinds of water source could be select, water loop type, underground water type or buried tube type .

FEATURES

STRUCTURE

Panels and frame are made from galvanized steel protected with polyester powder painting to ensure total resistance to atmospheric agents.

HERMETIC COMPRESSORS

Single phase or 3-phase scroll type compressors, with built-in thermal overload cut-out and crankcase heater, mounted on rubber vibration dampers..

CENTRIFUGAL FAN

 Low noise, Protection level IP44. 

FEATURES

STRUCTURE

Panels and frame are made from galvanized steel protected with polyester powder painting to ensure total resistance to atmospheric agents.

HERMETIC COMPRESSORS

Single phase or 3-phase scroll type compressors, with built-in thermal overload cut-out and crankcase heater, mounted on rubber vibration dampers..

CENTRIFUGAL FAN

 Low noise, Protection level IP44.

WATER SIDE HEAT EXCHANGER:

High efficiency coaxial heat exchanger, factory insulated with flexible close cell material.

REFRIGERANT CIRCUIT

Copper tube connection with charge valves, filter, capillary; high pressure switch and low pressure switch.

The heat pump units are complete also with 4-way valve and one way valve.

ELECTRIC PANEL

consists of:

l   Compressor contactor,

l   Compressor protection breaker,

l   Microprocessor with function display