Surface Additive of Mosaic Wall Brick

Specifications

It is an environment protective product and the leveling material of exterior
wall surface widely

Surface Additive of Mosaic Wall Brick

 

It is an environment protective product and the leveling material of exterior
wall surface widely used in architecture and decoration engineering. With the
use of advanced Germany technique, this product solves the knobbing,
scaling off, cracking and leaking problems between the surfaces of mosaic,
brick and cement, and patches up the defects of bad resistance to alkali,
extension, heat modification and bad adhesion.

Instruction:
1) Surface preparation: the surface should have a higher strength, with a basic
evenness and verticality, also should be dry, clean, and free from oil stain
and other loose substance
2) Mixing ratio: water : surface treating compound =0.38:1
3) According to the proportion of water and exterior putty powder, firstly
pour the rinsing into the mixing barrel, add powder then, stirring with an
electrical mixer until it is equal
4) Applies the layer with a trowel and spread evenly on the mosaic, ceramic
tile or concrete surface two times. The thickness of coating should be
within 3 - 4mm
5) After the layer is dried, exterior wall coating is applied when necessary

Packing:
25kg/bag