Home > Health & Medicine > Beauty Equipment > Skin Beauty Equipment > 40w Medical Hospital Equipment CO2 Fractional Laser 8.0 Inch With ISO13485 CE Medical CE Approved

40w Medical Hospital Equipment CO2 Fractional Laser 8.0 Inch With ISO13485 CE Medical CE Approved

40w Medical Hospital Equipment CO2 Fractional Laser 8.0 Inch With ISO13485 CE Medical CE Approved photo-1
US$ 1 - 19,999 MOQ: 1 Unit
Key Specifications
Get Latest Price
Laser Type:
CO2 Laser
Q-Switch:
No
Style:
Stationary
Payment & Shipping
Payment Methods:
Port of Shipment:
Shanghai
Delivery Detail:
Delivery time depends on order quantity.
Laser Type CO2 Laser
Q-Switch No
Style Stationary
Certification ISO CE MCE
Place of Origin Shanghai, China
Brand Name Bonni
Model Number K11

Principle of RF CO2 Fractional Laser

 

CO2 Fractional Laser System fires a laser beam which is split into numbers of microscopic beams, producing tiny dot or fractional treatment zones within the selected target area only. Therefore, the heat of laser only passes deeply through the fractional damaged area. This allows the skin to heal much faster than if the whole area was treated. During the skin self-resurfacing, a great amount of collagen is produced for skin rejuvenation, eventually the skin will look much healthier and younger. 


Specifications


2 Have an excellent effect
3 CO2 Fractional Laser Equipment more safe/effective

Treatment Principle:

Fractional laser technology is a kind minimal invasive treatment between invasive and noninvasive, which is the latest and hottest skin care technology in USA and it’s also the most often talked about by dermatology community for these two years in the world. It was first published in 2004 by laser medical expert of Harvard University, Dr. Rox Anderson, who based on the Fractional photothermolysis therory. Than it’s immediately recognized by experts all over the world and rapidly applied to clinical treatment. Fractional photothermolysis theory is an extension of traditional Selective Photothermolysis theory. It combines the advantages of invasive treatment and non-invasive treatment, so it is a kind of rapid treatment with prominent effects, little side effects and shorter period of recovery. Fractional laser treatment is by the means of punching evenly tiny holes in the skin by using laser, then arouse a series of biochemical reactions of skin to achieve skin tighteding, skin rejuvenation and pigmentation removal. Fractional laser teratment will only cover part of skin tissues, and the new small holes are not overlapped mutually, so part of normal skin will be retained and speed up to recover. Patient can return to normal lif after 4-5 days.

The Range of Treatment:

The treatment itself is safer. Besides, it can treat any parts of the body. Indications including acne scars, desalt and eliminate pigmentation, surgical scars, traumatic scars, burn scars, chloasma, Civatte poikiloderma, wrinkles, skin laxity, photoaging skin etc..

Technical Parameters:

Wavelengths: 10600nm 10.6μm

Max Power: 30W

Peak Power: 800W

Laser Output Modes: Continuous, Single Pulse, Repeat Pulse, Ultra Pulse

CO2 laser system

The CO2 laser with a specific wavelength of 10.6 nm can be absorbed by human body tissue (no matter what color the skin is) by nearly 100%. Through laser emitter, the micropulsed laser beam shoots on the target skin in nanometer level to achieve a controllable precise treatment .The dimension of shooting area only can be measured in nanometer, which is precise enough for operators to control and adjust the treated depth andlayer according to the clinical diagnosis.

The energy of CO2 laser is even and steady. Its focused energy aims only at target tissue without any injury to surroundings. It is the heat and electromagnetic effect of the laser that people use to conduct non-blood or less-blood cutting, cauterizing, gasification and accurate microsurgery so as to avoid skin burnt. During the treatment, biochemical reactions of optical-thermal accelerate collagen reproduction and skin recovery,after exfoliation of the tiny scar; fresh and smooth skin can be regenerated. The device outputs invisible laser. In order to operate with more ease, red semiconductor laser has been added to indicate.


Aiming Beam: 5mW Diode

Controls: Touch Screen

Display: Color LCD

Cooling: Water Closed Cycle Cooling System

Beam Delivery: 7 Joints Articulated Arm

Electrical: 230V 50Hz

Spot Diameter:  ≤0.2mm

Spot Spacing: 0.2-2mm

Pulse Duration: 100μm-10ms(Adjustable)

Treatment Area: 20*20mm2

Out Put Frequency: 1-1000Hz

Application:

 

1. Application Range of Fractional treatment handpiece
    a. Large pores, Fine lines, Skin tightening and whitening, Skin loosen(Deep Wrinkles), Stretch marks.
    b. Various Scars: Burn Scars, Acne Scars, Surgical Scars and Keloid;
    c. Reconstruction of photoaging skin.

2. Application Range of Incision Handpiece
    a. Via multiple handles it can be adapted to Gynecology, ENT, Neurology and general surgery
    b. In cosmetic surgery, it can be adapted to incisions for Blephaplasty, Skin Tags and Ingrow Nails, Compound Nevus and Intra Dermal Nevus etc


Scanner Weight: 0.7/1.5kg(Optional)

Scanner Size: 60*60*40mm

Power: 30W

Main Technical Parameters:    

Laser wavelength: 10.6µm                                                            

Laser unit:TEM00 module Co2 unit (best quality for the facula)                    

Output power: super pulse output 0.3-7W, peak value 450W,continuous output 0.3-25W

Laser output mode: continuous, single pulse, repeat pulse, super pulse, with the optional pixel laser handpiece for Pixel laser output mode

Conducting system: seven joints longer articulated arm(the most advanced conducting light system in the world and the only one in China). It could be operated in the scope of R=1.7m, which makes the operation more flexible    

Handpiece:multiple function handpiece and two kinds of focus lens for f=100mm and f=50mm. With the optional adapter, it could be used for orthopedic, gynaecology and ENT surgery 

Operation mode:controlled by a touch screen and with the engineer interface and the doctor interface  

Min. spot diameter:≤0.1mm, variable spot adjusting handpiece:0.1-2.5mm          

Pulse width: the minimum pulse width is 0.1ms  


Send Inquiry to This Supplier

* Message
0/5000

Want the best price? Post an RFQ now!
Business Type
Manufacturer
Year Established
2008
Factory Size
1,000-3,000 square meters
Total Employees
51 - 100 People

Recommended Categories

Explore top categories and find suppliers for your specific needs