15W(20W) CO2 Scanner Laser Machine K11 Co2 Skin 10600nm Tightening Fractional Laser Machine For Photoaging Skin Remove Neoplasms

Fractional Co2 laser treatment:

Ultrapulse fractional co2 laser emits thousands of deep, tiny focal spot columns in your skin, called microscopic treatment zones. These lights penetrate into dermis skin, gasify the tissues around wrinkles and scars in an instant and make a signal of compounding collagen like tissues repair, collagen rearrangement ettc to regain a new fresh and healthy skin of youth.

1. Fractional resurfacing is a new laser treatment modality that creates numerous microscopic thermal injury zones of controlled width, depth,and density that are surrounded by a reservoir of spared epidermal and dermal tissue,allowing for rapid repair of laser-induced thermal injury. This unique modality, if implemented with proper laser- delivery systems, enables high-energy treatments while minimizing risks.
   2.This machine use the RF Tube manufacturerd by Coherent America,the frequency can reach more than5000HZ,the high speed can work more efficiecnt and effectively,it is very good for the ultra pulse incision for the precise surgey,no blood,the treatment area is very clear,andless down time.

2. 
   

Specifications

Multi pulse and Scanner work mode
Max power:30W
Pulse width:0.1-10ms
Spot size Graph

Scanner Laser Machine10600nm wavelength

1. Principle of treatment

Fractional laser technology is a kind minimal invasive treatment between invasive and noninvasive,which is the latest and hottes skin care technology in USA, and it’s also the most often talked about by dermatology community for these two years in the world. It was first published in 2004 by laser medical expert of Harvard university,Dr. Rox Anderson, who based on the fractional photothermolysis theory.Then it is immediately recognized by experts all over the world and rapidly applied to clinical treatment. fractional photothermolysis theory is an extension of traditional selective Photothermolysis theory. It combines the advantages of invasive treatment and noninvasive treatment, so it is a kind of rapid treatment with prominent effects, little side effects and shorter period of recovery. Fractional laser treatment is by the means of punching every tiny holes in the skin by using laser, then arouse a series of biochemical reactions of skin to achieve skin tighting, skin rejuvention and pigmentation removal. Fractional laser treatment will only cover part of skin tissues, and the newsmall holesare not overlapped mutually, so part of normal skin will be retained and speed up to recover. Patient can return to normal life after 4-5 days. 

Fractional Co2 laser treatment:

Ultrapulse fractional co2 laser emits thousands of deep, tiny focal spot columns in your skin, called microscopic treatment zones. These lights penetrate into dermis skin, gasify the tissues around wrinkles and scars in an instant and make a signal of compounding collagen like tissues repair, collagen rearrangement ettc to regain a new fresh and healthy skin of youth.

 

2. Appilcation

 1.Skin resurfacing(wrinkle removal)

 2.Acne and acne scars

 3.Pigmentation(age spot, sun spot, melasma)

 4.Roughness(texture)

 

3. Advantage

 1. Fast

 2. Comfortable

 3. Variable density and denth

 4. One or two treatment

 5. Single pass

 6. No consumable costs

 

4. Technical Specification

1. How do I know if I need CO2 laser? 

 

Anyone who has sun damaged, aging skin, irregularly pigmented skin, wrinkles, sagging, irregular texture of the skin or other skin condition that could be expected to be improved with this treatment that understands the risks, costs and time necessary to achieve the full benefit of the procedure and who has realistic expectations of the ultimate outcome.

 

2. What benefits can I expect? 

Results that are expected are a very significant and noticeable reduction in the components of sun damaged skin such as “age-spots” (also called sun freckles, liver spots, and lentigines), fine lines, wrinkles, scarring, uneven coloration, skin laxity, textural irregularities, dull tone, and a thinned collagen layer. The skin will continue to improve for a period of 6 months following the procedure provided proper skincare is used and sun exposure is minimized. Sometimes the results are not significant until the 6th and even the 9th month, depending on the person's age, their aftercare routine and their history of smoking

Brief Introduction

 

Refine super pulsed CO2 laser Refine is a classic minimally invasive laser equipment for dermatologic surgery. This latest super pulsed laser emission system delivers hundreds of orderly micron pulsed laser beam on skin lesions, for controllable and accurate treatment by means of adjusting the size, density, distance,nature of the multiple arrays, and the diameter and the depth of the pore.

 

The treatment of Refine is very safe and can cover any part of the body. Its applications include a variety of wrinkles(forehead lines,eyebrow lines,eye wrinkles,perioral wrinkles,neck lines,stretch marks etc.),sagging skin, drooping eyelids, eyes bags, acne(whelk) marks, all kinds of scar(trauma scar,burn scar,suture scar),stains etc.

  

3. Is there another way to get the same effect? 

 

Typically, there are no other treatments that can give you as much of an overall effect with only one treatment. You would have to combine the above with fillers or tissue tightening devices to achieve similar effects.

Brief Introduction

 

Refine super pulsed CO2 laser Refine is a classic minimally invasive laser equipment for dermatologic surgery. This latest super pulsed laser emission system delivers hundreds of orderly micron pulsed laser beam on skin lesions, for controllable and accurate treatment by means of adjusting the size, density, distance,nature of the multiple arrays, and the diameter and the depth of the pore.

 

The treatment of Refine is very safe and can cover any part of the body. Its applications include a variety of wrinkles(forehead lines,eyebrow lines,eye wrinkles,perioral wrinkles,neck lines,stretch marks etc.),sagging skin, drooping eyelids, eyes bags, acne(whelk) marks, all kinds of scar(trauma scar,burn scar,suture scar),stains etc.

Model	PC030-B(Ultra Pulse)
Wavelength	10600nm
Mode Structure	TEM00
Max Power	30W
Peak Ppwer	800W
Laser Output Modes	Continuous, Single Pulse,Ultra Pulse
Aiming Beam	5mW Diode
Controls	Touch Screen
Display	Color LCD
Cooling	Water Closed Cycle Cooling System
Beam Delivery	7Joints Articulates Arm
Electrical	230V 50Hz
Warranty	1 year

 

5. Easy to Operate:

The scanner could be applicable in laser surgery, the doctor who operating with the scanner is not needed to have a complicate training course for operating steps. Instead, the doctor only need to select the figure of treatment, then easy to set up the most basic parameter and to do the treatment. The operation of scanner will be easy and humanized, so that the doctor could serve for each patient more intently.

 

6. The Scanner Technical Specification:

Spot Size	≤0.2mm Min 0.1mm at the focus
Interval Between 2 Spots	100us-10ms(adjustable)
Pulse Repetition	1-1000Hz
Treatment size	20x20mm
Net Weight	0.7kg/1.5kg(adjustable)
Size	60x60x40mm

Any requirement, pls feel free to let us know!

Amanda Zhang

 

 

 

 

1. How do I know if I need CO2 laser? 

 

Anyone who has sun damaged, aging skin, irregularly pigmented skin, wrinkles, sagging, irregular texture of the skin or other skin condition that could be expected to be improved with this treatment that understands the risks, costs and time necessary to achieve the full benefit of the procedure and who has realistic expectations of the ultimate outcome.

 

2. What benefits can I expect? 

Results that are expected are a very significant and noticeable reduction in the components of sun damaged skin such as “age-spots” (also called sun freckles, liver spots, and lentigines), fine lines, wrinkles, scarring, uneven coloration, skin laxity, textural irregularities, dull tone, and a thinned collagen layer. The skin will continue to improve for a period of 6 months following the procedure provided proper skincare is used and sun exposure is minimized. Sometimes the results are not significant until the 6th and even the 9th month, depending on the person's age, their aftercare routine and their history of smoking

  

3. Is there another way to get the same effect? 

 

Typically, there are no other treatments that can give you as much of an overall effect with only one treatment. You would have to combine the above with fillers or tissue tightening devices to achieve similar effects.

1. Fractional resurfacing is a new laser treatment modality that creates numerous microscopic thermal injury zones of controlled width, depth,and density that are surrounded by a reservoir of spared epidermal and dermal tissue,allowing for rapid repair of laser-induced thermal injury. This unique modality, if implemented with proper laser- delivery systems, enables high-energy treatments while minimizing risks.
   2.This machine use the RF Tube manufacturerd by Coherent America,the frequency can reach more than5000HZ,the high speed can work more efficiecnt and effectively,it is very good for the ultra pulse incision for the precise surgey,no blood,the treatment area is very clear,andless down time.

2.