AHKD-1000XYZ Full-automatic high-tech digital Knoop and Vickers Hardness Testers

Specifications

1) Best value Knoop and Vickers Hardness Testers
2) Factroy direct price, accept custom made.
3) CE and ISO9001 Approved

We are 100% manufacturer, give you factory price for full-automatic high-tech digital Knoop and Vickers Hardness Testers, save your cost !

 

 

 

1.  Description

AHKD-1000XYZ full-automatic Knoop hardness test system, integrated with optical projection, mechanic shift, electric control, digital projection, image analysis, and computer process etc. kinds of latest professional technique, it can control the Knoop hardness tester and auto stage by host, and indicate the indentation on the screen by digitization, then test the micro hardness of metal parts of non-metal material, kinds of film, plating,  harden depth, coating thickness, film thickness, and the distance between two points by automatic reading, manual reading; meanwhile, it can take the picture of surface appearance of metal, and print in fixed ratio. This system breaks through the traditional test method, complete the full automatic, high accuracy, high repeatability test; it is the important equipment for analysis material. It can measure the hardness of material from soft to hardened type, including the carburization, nitridation, quench hardening coating, surface coating, steel, ferrous metal, glass and ceramic material.

 

2.  Compose

 

 

 

 

AHKD-1000XYZ full automatic measuring system, receiving the information and control of the Knoop hardness tester by connecting the RS 232 port to host, and control the stage box, then control the auto stage to move and receive the information; move the auto stage to the best image surface by controlling the focus device. The indentation transferred optical signal, and indicate on the screen by digital camera, then get the Knoop hardness value by manual and auto reading.

 

 

 

1.  Technical specifications

 

3.  1 System name:

 

Full-automatic high technique digital Knoop hardness tester

 

3.2 System model:

 

AHKD-1000XYZ

 

3.3 System function

 

A.System linkage

 

It can control the hardness tester of the movement, information required, including turret, loading, dwell time settings, lightness of illumination and required of present pressure test parameters.

 

B.Platform linkage

 

Control the electric stage to move as set of direction, distance, and speed under different modes.

 

C.Focus linkage

 

    Control electric stage and adjust lifting up and down, and auto-search the best focal plane.

 

D.Digital imaging

 

    It adopts the most advanced digital imaging technique, imaged by USB2.0 port.

 

E.Hardness measurement

 

    Read the Knoop hardness value by manual, automatic, and it can convert various hardness value equaled.

 

F.Result output

 

   Save the measuring result, conditions, indentation image and so on kinds of test process, data, and print report and image.

 

 

 

 

 

3.4 Software process

 

 

 

 

3.5 Functions and Features

A.Totally interact with hardness tester system

Totally control hardness tester movement and hardness parameters collected, including objective, indenter choosing, dwell time setting(1-20 s), lighting brightness adjusting(0-240 grades), loading start and test force acquired, test method(HV/HK) chosen, test result(D1, D2, HV) of hardness tester

B.High accuracy, various auto-stage controls

1)High accuracy auto-stage

Repeatability accuracy≤2μm;Minimum pace ≤1μm;

Operation is manual, electric, and computerized control;

2)Convenient stage control

Software controlled stage of the power on, off state, which can customized by users’ habit to choose manual, electric, computer control etc. that each of the modes to work

Support X, Y synch-move, save more time

3)Accurate auto focus

Accurate auto focus calculation that can adjust the control platform up and down to the best imaging plane.

4)Flexible computer control mode.

Fixed position movement:Move the stage to the position set by software;

Fixed point movement:Choose any point on the specimen, move under to indenter;

Directional movement:Press mouse and move the control stage to eight directions, the step distance can be set;

Move at will:Move the stage to any direction by mouse, it is convenient for customer to view the surface of specimen;

Variable speed movement:There are five grades speed optional when move the stage;

Other functions:Original point set at will, automatic reset, mechanic limit etc. kinds of professional functions, satisfy kinds of requirements;

5)Various stage application mode

Software provides kinds of programmed test methods by hardness tester controlled, digit imaging, auto stage, manual/auto reading etc. several methods combination:

Indenter press and test at same time:move platform——Indenter press——auto/manual test——move the platform again

 

 

 

Track movement:Move by track set, press, reading;

6)Powerfully auto platform coordinate

    Using several modes methods to make sure customer when place the specimen when it is not vertical or horizontal, it is also can acquire the satisfactory results.

Two points way:Make two points from the specimen, then it can move the stage between the two points;

Normal mode:Choose the normal tangent the edge of the specimen as the direction to move;

Angle bisector:Choose the angel, make the bisector as the direction for specimen movement;

 

C.High resolution digit imaging technique

High resolution digit imaging system, the maximum resolution can reach up to 1.3 million pixel(1280X1024), it far surpass common simulation camera(less than 0.4 million pixel),providing the basic for high accurate test.

When plug into when use, it is equipped with electric jack plug for USB 2.0 port, it make the installation and maintenance easy, it is no need to close the power to install all the installation, adjusting, maintenance work  .

 

Support several image formats, to satisfy customers’ requirements

 

D.Make sure high accuracy, high repeatability test, it adopts the unique and advanced technique.

1)Convenient and practical calibration function——Use standard test card to calibrate the whole system;

2)Lead auto reading technique——Lead auto reading technique,it is not only can get the sub pixel, high accuracy,  high repeatability, but also it adapts to common indentation, even including the images of  corrosive some, scratch, light uniformity, light corrosive, the test speed is fast.;

3)Unique to acquirement of the point by manual or automatic——user can acquire the point approximately that closet to the indentation of the four peaks, the system can tell the best position and read directly; it meets most users’ habit requirement, also it reduce the work intensity for users;

4)Common manual test method——include four peaks measurement, 2 diagonals measurement. User can randomly get 4 peaks when take four peaks measurement, it is convenient for users.

 

E.Impeccable function of results process, save and output

1)Hardness conversion

Automatic several hardness value convert according to national standard, indicating in real time.

2)Over tolerance warning

According to the upper and lower limits of the set hardness value, indicate the warning of the over tolerance.

3)Hardness——depth curve

It can graph the hardness—depth curve according to the test data; it can indicates the multi-curve in combined, independent mode;

4)Complete test parameter and result record

Save all the test result according to image, it can save test data, include D1,D2,HV value,platform position, X,Y and test force,dwell time, test method, calibration data and test parameters.

5)Various record method

WORD,EXCEL,exclusive and so on various doc. format;

6)Print in fixed ratio

It can print in fixed ration of the surface appearance according to customers’ requirement.

 

3.6 Technical specifications

A.Computer host

Lenovo main host:

B.Operation system suitable

WINDOWS 2000/XP/VISTA

C.Digit imaging system

High resolution:1.3 million pixel(1280X1024)

High speed capture:1280X1024 resolution:25 frame/s;640X512 resolution:79 frame/s;

High definition:monochrome picture, better definition;

Target surface:1/2 inch

D.X-Y auto stage

Table size:More than 110X110 mm

Maximum movement:25X25 mm

Minimum pace:less than 1μm

Movement speed:adjustable;

Control mode:Manual, electric, computer control;

E.Focus device

Owned 40X auto focus;

Support manual focus;

F.X-Y stage computer control mode

Fixed position movement, fixed point movement, directional movement, setting track movement and so on various movements, which can be saved, and adjusted.

G.Test mode

Semi-automatic——auto stage + manual focus + auto reading

Manual mode 1——auto loading + manual measurement of objective

Manual mode 2——manual stage + manual focus + manual focus + auto/manual measurement

H.Auto/manual reading

Time of auto reading:it is about 300 ms for single indentation;

Auto measurement accuracy:0.1μm;

Auto measurement repeatability:±0.8% (700HV/500gf,imaging in good definition)

Manual reading:manual click acquirement,auto researching point,4 peaks measurement,2 diagonals measurement;

I.Result save/output

Save/output measuring data and test parameters, include D1,D2,HV,X,Y and so on;

Save/output effective harden coating depth curve report;

Save/Output image.

 

Model	AHKD-1000XYZ
Test force	10g (0.098N),25g (0.245N),50g (0.49N),100g (0.98N ),200g (1.96N),300g (2.94N),500g (4.9N),1000g (9.8N)
Scale	HK0.01,HK0.025,HK0.05,HK0.1,HK0.2,HK0.3,HK0.5,HK1,HK2
Minimum measuring unit	0.01μm
Measuring hardness range	1HK-4000HK
Hardness value read	Computer screen
Total amplification times	1500X
Loading mode	Fully automatic(load, dwell, unload)
Dwell time	1-99s
Objective and indenter shifting	Auto turret shift(objective-indenter-objective complete automatic)
Specimen maximum height allowed	85mm
Throat depth	110mm
Instrument size	405×290×480mm(L×W×H)
Instrument weight	45kg
Light source	LED cold light source(continuous using 24 hours, life-span can up to 100 thousand hours
Power supply	110V/220V + 5%, 50/60 Hz
X-Y working platform	Size:110×110 mm,Maximum movement: 25×25mm
Data output	The test data automatic generation format Word, Excel and so on report, print A4 report, save the image JEP/BMP format
Executive standard	GB/T4340.2 National standard ,JJG151 inspection rules
Standard accessories	Knoop hardness tester 1 set, fully automatic hardness measurement image software 1 set, auto stage 1 piece, digit camera 1 set, platform controller 1 piece, brand computer 1 set, brand printer 1 set
Optional	Metallographic instrument

 

 

 

 

Our  factory

 Modern plant, office building and equipments, Senior engineer and experts and professional team provide the high technology.

 

Certificate:

 

 

Customers:

 

We uphold "Comprehensive, high quality,fast" service standards and customer satisfaction as the goal ,won the customer's approval.At present, our current customers from USA, Canada, Russia, Danmark, Poland, India, Korea,etc more than twenty countries and regions.

 

Our Partners: