Contact Platform Support
Help CenterStreet Light Pole
Related Products
Specifications
1.Q235 steel tube2.Hot dip galvanized
3.Coated powder(any colar)
4.Strong wind resistant
Designed or improved for various kinds of Road light,street light pole,outdoor lighting pole, street lighting,lighting pole,lighting,road lighting pole,road light pole,road lamp pole,steel pole,light pole,lighting pole,street pole,road pole,poles, high mast poles, and traffic single pole.
Specification:
Material: |
high quality Q235 hot rolled steel |
Mounting Height: |
15M-40M |
Shape of pole: |
Round,conical,octagonal,square,mid hinged,polygonal shafts are made of steel sheet that folded into required shape |
Brackets: |
Single or double brackets are in the shape and dimension as per customers requirement |
Base plate: |
Base plate is square or round in shape with slotted holes for anchor bolt and dimension as per customers requirement |
Ground mounted: |
The length buried underground as per customers requirement |
Galvanizing: |
Hot dip galvanization with thickness of 80-100µm average |
Powder coating: |
Plastic powder painting, color is optional |
Thickness of bending plate |
2.5mm-20mm |
1.Key Process:
(1)Material Preparation→(2)Bending→(3)Welding→(4)Repair and Grinding→(5)Reforming→(6)Flushing→(7)Fix bottom plate→(8)Welding bottom plate→(9)Opening door→(10)Welding door strip, electric strip, and locking→(11)Bending arm→(12)Hot dip galvanization→(13)Plastic powder painted→(14)Inspection→(15)Shipment
2.Each process:
Material preparation
1)Before cutting the plate, first adjust the inclination to meet with required vertical shears.
2)Fix the position of steel plate, assure maximum excess material.
3)The length is decided when laying up the plate. The size of bottom should not more than ±2mm, but for high mast the tolerance should be plus, usually: 0 to 2m, for small ending, the tolerance should be minus, usually -2 to 0mm. When adjust is ready, the cutting machine will finish cutting.
4) About equipment: check condition of roller shear, clean sundries on the track, maintain good conditions.
Bending
The work of bending is the most important process, which will directly influence the quality of pole, and the finished product cannot be repaired. Pay attention to following tips:
1)before bending: remove residues to keep new plate away from damage
2)check the length, width and straightness of plate, the non-straightness should be less than 1/1000, if the non-straightness meets requirement, correct, especially the polygon poles must keep non-straightness.
3)adjust the depth of bending with the bending machine, and confirm the location of plate.
4)Correctly mark line on the plate, the tolerance should be less than ±1mm.
5)Correctly line up and bend to keep min seam, meanwhile the distance between two sides should be less than 5mm.
Welding
Weld the seams of bended plate. As it is semi-auto welding ,the welder has more work to do, he should adjust the position of welding and assure straightness of line.
Send Inquiry to This Supplier
You May Also Like
-
Aluminium Lamp PostNegotiableMOQ: 1 Ton
-
110kv High Quality Galvanized Steel Power PoleUS$ 100 - 500MOQ: 1 Set
-
1' Diameter High Quality Lighting Accessories Hanging LoopUS$ 0.2 - 2MOQ: 1000 Pieces
-
Ductile Iron Light Base of SYI GroupUS$ 1 - 10,000MOQ: 1 Set
-
2.4G 4-zone Mi Light Wireless RGBW RF Remote Controller + 4pcs Group Control for Lampada Led Lamp Light 5050 3528 RGB Led StripUS$ 0.1 - 100MOQ: 1 Piece
-
SY-6MC50 Motorized Telescopic Mast Retractable Electric Antenna MastNegotiableMOQ: 100 Units
-
Fiberglass Composite Utility Poles Power / Electric /5g /Transmission TowerUS$ 1000MOQ: 10 Units
-
SJS PULAITE Manual Winch Lifting MastNegotiableMOQ: 1 Piece
-
High Quality Hot Dip Galvanized Double Arm Street Light Pole of CEUS$ 50 - 150MOQ: 10 Sets
-
Modern Street Steel Post China SuppliersUS$ 700 - 1,500MOQ: 1 Set
